Laboratory instruments
Fume Hood
- Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personal and equipment in the laboratories.
- A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in high up atmosphere through ducting.
- Fabricated out of thick ply board clad from outside with laminated sheet and inside finished in non- corrosive epoxy paint.
- An up-down sliding sash with glass sheet is provided.
- Flurescent lighting is also provided.
- A gas tap, water tap and wash basin is also provided.
Compare
OPTIONAL ACCESSORIES:
- Digital timer for blower.
- Utility valves from outside.
- Granite table top.
- Inner walls of FRP sheets.
- Extra electrical sockets 15 Amp.
- Back grill for holding clamps.
| GTIN |
|---|
You must be logged in to post a review.
Q & A
Ask a question
There are no questions yet
You may also like…
-
Laboratory instruments
Laminar Air Flow Cabinet Horizontal
- Laminar flow principle involves double filtration of air through pre-filters (upto 5 microns) and hepa filters (down to 0.3 microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface.
- Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAC3 -
Laboratory instruments
Infrared Moisture Balance
- A basic method for determination of moisture content, measure moisture percentage by weight and drying simultaneously.
- Infra Red radiation are radiation are reflector by a bulb and its Temperature is controlled by a regulator.
- The balance scale is divided in terms of moisture content on net weight basis.
SKU: IRM20 -
Laboratory instruments
Digital Bomb Calorimeter (without Oxygen Cylinder)
- DIGITAL BOMB CALORIMETER (with safety device) Bomb calorimeter outfit provides a simple and inexpensive method
for determination of heat of combustion of organic matter and the calorific value and sulphur content of solid and liquid
duel. - The outfit supplied is complete for analysis as per the method recommended by British standard institution BS 1016.
- All parts of the outfit have been finished of petroleum and british standard institute.
SKU: DBC2 - DIGITAL BOMB CALORIMETER (with safety device) Bomb calorimeter outfit provides a simple and inexpensive method
Related products
-
Laboratory instruments
Deep Freezer, -40ยฐC
- Double wall construction with PUF insulation between inner and outer wall.
- Refrigeration system through hermitically sealed compressor inner high grade stainless steel outer made of mild steel sheet duly painted in powder coated paint.
- Temperature range upto -40ยฐC controlled by microprocessor based digital temperature controlled cum indicator.
SKU: DF40 -
Laboratory instruments
Environmental Chamber (Humidity Cabinet Delux)
- Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity.
- Inner chamber and trays are made of stainless steel (S.S.-304 Grade).
- Outer wall of mild steel sheet duly powder coated.
- Mounted on caster wheels for easy portability.
- High grade glass wool insulation between outer and inner chamber for minimal thermal loss.
- Front double walled door is provided with lock and key arrangement.
- A self-cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber.
SKU: HCD112 -
Laboratory instruments
Muffle Furnace – Industrial Model
- Outer shell made out of thick mild steel sheet duly finished in stoving enamel paint.
- Fitted with Muffle Block for supporting heating elements working temperature 1100ยฐC controlled by superior energy regulator or digital temperature controller cum indicator.
- Maximums temperature 1150ยฐC. Complete with CI/AL thermocouple with pyrometer, High clamp panel with include voltmeter, MCBs, Light, thermal fuse etc.
SKU: MFIM9 -
Laboratory instruments
Humidity Chamber
- Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild
steel duly painted in powder coated paint or stoving paint. - Temperature range 5ยฐC to 55ยฐC + 2ยฐC and humidity from 55% to 95% +3% Rh.
- Stainless steel water reservoirs heated by immersion heaters provide humidity complete with all accessories.
SKU: HC95 - Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild
-
Laboratory instruments
Water Still : (Manasty Type) Stainless Steel
- Wall hanging stainless steel vessel is electrically operated for getting pyrogen fee distilled water.
- Wall hanging arrangement is provided. Condenser is stainless and fitted with automatic ejection device which operates when water
supply is cut off and chamber gets dry. - Baffle cup condenser are made of stainless steel sheet.
SKU: WSMT2
Reviews
There are no reviews yet