Key Features and Benefits
IGRA-TB 25
150 Test Cartridges
150 Detector tubes
6 Detector diluents
(for testing 50 patients)
IGRA-TB Tube
50 Nil tubes
50 TB antigen tubes
50 Mitogen tubes
Detect latent tuberculosis infection quickly and accurately with the iChroma IGRA-TB Test Kit. This simple, rapid test identifies TB by combining a highly specific cell-mediated immune response (CMI) against Mycobacterium tuberculosis (MTB) with a sensitive lateral flow detection system. Essential for proactive treatment, the iChroma IGRA-TB helps prevent the progression of latent TB to its active, transmissible form, providing a crucial tool in the fight against tuberculosis
3 Part Veterinary Hematology Analyzer – Quickcell Vet Plus
Assays: 24 parameters(including WBC, Neu#, Lym#, Gran#, Neu%, Lym%, Gran%, RBC, HGB, HCT, MCV, MCH, MCHC, RDW-SD, RDW-CV, PLT, MPV, PDW-SD, PDW-CV, PCT, P-LCR, P-LCC, NLR, PLR)
18+ Species
Cat, Dog, Rabbit, Sheep, Goat, Cattle, Horse, Rat, Mouse, Llama, Deer, Musk deer, Monkey, Tiger, Dolphin, Pig, Camel, Ferret.
Reagents
2 Reagent (1 Lyse + 1 Diluent)
1 Probe cleanser for maintenance
STANDARD ACCESSORIES
Lipid Profile Strips
The Lipid profile test will give a detailed picture of your cholesterol levels so it can allow you to better manage your diet or for your doctor or healthcare professional to manage any medication you may be taking.
Features and Benefits
Intented Use
This product performs qualitative analysis on Tsutusgamushi-specific IgM and IgG antibodies in serum, plasma and whole blood.
BEAKERS
| Beakers Low form and Graduation | |||||||
| 1 | Cat # | QLBG 015 | QLBG 016 | QLBG 017 | QLBG 018 | QLBG 019 | QLBG 020 |
| 2 | Capacity | 5ml | 10ml | 25ml | 50ml | 100ml | 150ml |
| 1 | Cat # | QLBG 0210 | QLBG 023 | QLBG 025 | QLBG 026 | ||
| 2 | Capacity | 250ml | 500ml | 1000ml | 2000ml |
| Glucose Ranges | 20 – 800 mg/dL |
| Fill Direction | Automatic |
| Sample Mode | Capillary |
| Sample | Whole Blood |
| Sample Volume | 0.5 µL |
| Analysis Time | 5 Seconds |
| Battery | 3v Lithium Battery (CR2032) Lasts for 1000 tests |
| Relative Humidity | 10-95% (Non-Condensing) |
| Operating Temperature | 2-50 Degree Centigrade |
| Strips Storage Temperature | 0-50 Degree Centigrade |
| Interference | Minimal |
| Memory | 1000 Readings |
| Shelf Life of Strips | 24 months (From Date of Manufacturing) |
| Display | 48 mm (diagonally) LCD |
Lab bottles Blue Capped: Laboratory reusable bottles are ideal for sample preparation, storage, transport, and sterilization.
These are Wide Mouth (Mouth dia same in all capacities) with threaded Polypropylene
screw cap (totally leak proof)
Manufactured from 3.3 borosilicate glass for high resistance to thermal shock, superior chemical compatibility, and transparency.
Fired-on durable white ceramic graduations with easy-to-read scale for accurate measurements.
Large labeling spot for easy identification.
Includes polypropylene (PP) screw cap for sample protection and pouring ring for drip-free pouring.
The service temperature level of the screw cap and pouring ring: +140°C.
| LAB BOTTLES: Blue Capped Bottles | |||
| S.No | Capacity | Cat# | Units/ Packet |
| 1 | 25ml | QLBG 046 | 1 |
| 2 | 50ml | QLBG 047 | 1 |
| 3 | 60ml | QLBG 048 | 1 |
| 4 | 100ml | QLBG 049 | 1 |
| 5 | 250ml | QLBG 050 | 1 |
| 6 | 500ml | QLBG 051 | 1 |
| 7 | 1000ml | QLBG 052 | 1 |
| Strip (Working Environment) | Working Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip (Storage Environment) | Storage Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip Shelf Life | 18 Months |
| Auto Calibration | Auto/Self Calibrations |
| Sensitivity | More than 80% |
| Specificity | More than 80% |
| Bias (Limits of Agreement) | 0.5 g/dL (±1gm/dL) |
| Accuracy | 98% |
| Reproducibility | CV : < 3% |
| Measurement Range | 0 – 25.6 g/dL, 0 – 256 g/L, 0 – 15.9 mmol/L |
| Sample | Whole blood (Capillary, Venous, Arterial) |
| Sample Volume | 10 µL |
Lactate Meter
| Lactate Ranges | 1 – 20 mmol/L |
| Fill Direction | Automatic |
| Sample Mode | Capillary |
| Sample | Whole Blood |
| Sample Volume | 0.5 uL |
| Analysis Time | 5 Seconds |
| Battery | 3v Lithium Battery (CR2032) Lasts for 1000 tests |
| Relative Humidity | 10-95% (Non-Condensing) |
| Operating Temperature | 2-50 Degrees Centigrade |
| Strips Storage Temperature | 0-50 Degree Centigrade |
| Interference | Minimal |
| Memory | 50-500 Readings |
| Shelf Life of Strips | 15 months (From Date of manufacturing) |
| Display | 48 mm (diagonally) LCD |
| S.No | Capacity | Cat# |
| 1 | 30ml | QLRBCN30 |
| 2 | 60ml | QLRBCN60 |
| 3 | 125ml | QLRBCN125 |
| 4 | 250ml | QLRBCN250 |
| 5 | 500ml | QLRBCN500 |
| 6 | 1000ml | QLRBCN1L |
| 7 | 2000ml | QLRBCN2L |
3 Part Veterinary Hematology Analyzer – Quickcell Vet Plus
Assays: 24 parameters(including WBC, Neu#, Lym#, Gran#, Neu%, Lym%, Gran%, RBC, HGB, HCT, MCV, MCH, MCHC, RDW-SD, RDW-CV, PLT, MPV, PDW-SD, PDW-CV, PCT, P-LCR, P-LCC, NLR, PLR)
18+ Species
Cat, Dog, Rabbit, Sheep, Goat, Cattle, Horse, Rat, Mouse, Llama, Deer, Musk deer, Monkey, Tiger, Dolphin, Pig, Camel, Ferret.
Reagents
2 Reagent (1 Lyse + 1 Diluent)
1 Probe cleanser for maintenance
| Methodology | Reflectance Photometer |
| Test Time | Less than 30 seconds |
| Automatic Shut Off | 5 minutes after last use |
| Meter Size | 100 mm × 54.5 mm × 25.5 mm |
| Display Size | 38.5 mm × 37.5 mm |
| Weight | 72 g (without batteries) |
| Meter Storage Conditions | 0 – 50 ºC (32 – 122 ºF) |
| Operating Conditions | 2 – 40 ºC (35.6 – 104 ºF) |
| Working Humidity | 5 – 95% RH |
| Analyzer Port | USB Cable for Data Transfer & Power |
| Capabilities | USB Data Transfer to PC and Printer |
| Meter Warranty | 3 Years |
| Strip (Working Environment) | Working Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip (Storage Environment) | Storage Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip Shelf Life | 18 Months |
| Auto Calibration | Auto/Self Calibrations |
| Sensitivity | More than 80% |
| Specificity | More than 80% |
| Bias (Limits of Agreement) | 0.5 g/dL (±1gm/dL) |
| Accuracy | 98% |
| Reproducibility | CV : < 3% |
| Measurement Range | 0 – 25.6 g/dL, 0 – 256 g/L, 0 – 15.9 mmol/L |
| Sample | Whole blood (Capillary, Venous, Arterial) |
| Sample Volume | 10 µL |
| Power Source | 3 AAA Rechargeable Batteries (1.5V), AC Adapter (Mini USB, 5V DC, 1A) |
| Battery Life | 100 hours or 1000 tests |
| Units of Measure | g/dL, g/L, mmol/L |
| Memory | 1000 records with date and time |
SALIENT FEATURES
Ultrasonic Cleaner operates at 40kHz frequency. These high frequency sound waves convert the electrical energy into ultrasonic waves in the form of vibration by means of PEIZO transducers. The Accumulation of ultrasonic waves produces millions of microscopic cavitation bubbles. These cavitation bubbles drives the cleaning solution into components to be cleaned, removing away all the dirt and accumulated residues on them.
Lightweight, portable, compact and easy to use,
qLabs platform features:
Interface: Expansion of user interface through the adoption of Android OS
Display: 7 “touch panel provides operational stability and quick response
Portability: Battery for unexpected power failure or poor power environment for a certain period
Data storage and update: Available to store and search a large amounts of test results
Data backup and OS update using SD card
**Applicable only for Indian Buyers: Price shown in RUPEES is inclusive of GST 18% , You will get the GST bifurcated details in the Tax Invoice
Sample Volume 100 μL (Capillary/Micro mode) Results with 1 Sample 27 different Result Sample Type Whole Blood, Serum, Plasma, CSF & Diluted Urine Parameters Blood Gas: pH, PCO2, pO2, Hct
Electrolytes: Na, K, Li, Cl, iCa
Metabolites: LGU, LAC
Calculated Parameter: Hb, HCO3, BE, BE-B, BE-ECF, TCO2, AG, AG(K), O2 Sat, O2 Ct, SBC, nCa, TCa, pO2%, A, AaDO2, a/A
Features
System Function:
General: Benchtop, automatic, discrete, random access, STAT sample priority
Throughput: Up to 120 tests per hour
Principle: Colorimetry and turbidimetry
Method: End-point, fixed-time, kinetic, etc.
Programming: Open or closed system on demand
Reagent/Sample handling
Reagent: 54 reagent positions
Sample: 27 sample positions
Reagent Volume: 10-300 μL, step by 1 μL
Sample Volume: 1-70 μL, step by 0.1 μL
Liquid level detection, vertical & horizontal collision detection
and reagent inventory monitoring
Probe Cleaning: Auto interior and exterior wash
Calibration and control:
Calibration: K-factor, Linear, Spline, Logit-Log
4P, Logit-Log 5P, Exponential, Polynomial
Control: Westgard multi-rule, Cumulative sum check,
Twin plot, L-J Chart
Operation system:
Computer: Built-in operation system
Screen: 10.4 inch color touch screen
Data Storage: 100,000 results
Printer: Built-in and external printer
Others: Soft keyboard Compatible with keyboard and mouse
Interface: Ethernet, USB, RS232, VGA, HDMI, etc
Water Consumption: ≤ 1.5 L/H
Reaction Tray: 81 reusable cuvettes,
Wavelength: 8 wavelengths: 340nm, 405nm,
450nm, 510nm, 546nm, 578nm, 630nm, 670nm
Absorbance: 0-4.5 Abs
Fully Automated – Auto Sampling
Test Time – Less than 1 minute
Built in printer for results
Principle: Innovative microfluidic and micro sensor technology
Parameters Measured: pH, pO2, pCO2, Na, K, Ca, Cl, Glu, Lac, Hct
Sample types: Arterial, Venous, Capillary, Mixed, CPB, Aqueous
Triple Result Guarantee: Ensured with Calibrator, Control and Electronic simulator
12 Months Cartridge Shelf life
Micro sample – 140 µl
Zero maintenance
| Glucose Ranges | 20 – 800 mg/dL |
| Fill Direction | Automatic |
| Sample Mode | Capillary |
| Sample | Whole Blood |
| Sample Volume | 0.5 µL |
| Analysis Time | 5 Seconds |
| Battery | 3v Lithium Battery (CR2032) Lasts for 1000 tests |
| Relative Humidity | 10-95% (Non-Condensing) |
| Operating Temperature | 2-50 Degree Centigrade |
| Strips Storage Temperature | 0-50 Degree Centigrade |
| Interference | Minimal |
| Memory | 1000 Readings |
| Shelf Life of Strips | 24 months (From Date of Manufacturing) |
| Display | 48 mm (diagonally) LCD |
| Glucose Ranges | 20 – 800 mg/dL |
| Fill Direction | Automatic |
| Sample Mode | Capillary |
| Sample | Whole Blood |
| Sample Volume | 0.5 µL |
| Analysis Time | 5 Seconds |
| Battery | 3v Lithium Battery (CR2032) Lasts for 1000 tests |
| Relative Humidity | 10-95% (Non-Condensing) |
| Operating Temperature | 2-50 Degree Centigrade |
| Strips Storage Temperature | 0-50 Degree Centigrade |
| Interference | Minimal |
| Memory | 1000 Readings |
| Shelf Life of Strips | 24 months (From Date of Manufacturing) |
| Display | 48 mm (diagonally) LCD |
Glucometer Test Strip for Gluco Spark Model
50 Test Strip + 50 Lancet
| Glucose Ranges | 20 – 800 mg/dL |
| Fill Direction | Automatic |
| Sample Mode | Capillary |
| Sample | Whole Blood |
| Sample Volume | 0.5 µL |
| Analysis Time | 5 Seconds |
| Sample Type | Blood |
| Sample Volume | 50 uL Whole Blood |
| Accuracy | 0.95 |
| Shelf Life | 12 Months |
| Packing Type | Box |
| No Of Strips | 50 Strips |
| Methodology | Reflectance Photometer |
| Test Time | Less than 30 seconds |
| Automatic Shut Off | 5 minutes after last use |
| Meter Size | 100 mm × 54.5 mm × 25.5 mm |
| Display Size | 38.5 mm × 37.5 mm |
| Weight | 72 g (without batteries) |
| Meter Storage Conditions | 0 – 50 ºC (32 – 122 ºF) |
| Operating Conditions | 2 – 40 ºC (35.6 – 104 ºF) |
| Working Humidity | 5 – 95% RH |
| Analyzer Port | USB Cable for Data Transfer & Power |
| Capabilities | USB Data Transfer to PC and Printer |
| Meter Warranty | 3 Years |
| Strip (Working Environment) | Working Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip (Storage Environment) | Storage Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip Shelf Life | 18 Months |
| Auto Calibration | Auto/Self Calibrations |
| Sensitivity | More than 80% |
| Specificity | More than 80% |
| Bias (Limits of Agreement) | 0.5 g/dL (±1gm/dL) |
| Accuracy | 98% |
| Reproducibility | CV : < 3% |
| Measurement Range | 0 – 25.6 g/dL, 0 – 256 g/L, 0 – 15.9 mmol/L |
| Sample | Whole blood (Capillary, Venous, Arterial) |
| Sample Volume | 10 µL |
| Power Source | 3 AAA Rechargeable Batteries (1.5V), AC Adapter (Mini USB, 5V DC, 1A) |
| Battery Life | 100 hours or 1000 tests |
| Units of Measure | g/dL, g/L, mmol/L |
| Memory | 1000 records with date and time |
Hemoglobin Meter – Features
Product Inside
Designed for POC Testing
Accurate
Quick & Convenient
| Methodology | Reflectance Photometer |
| Test Time | Less than 30 seconds |
| Automatic Shut Off | 5 minutes after last use |
| Meter Size | 100 mm × 54.5 mm × 25.5 mm |
| Display Size | 38.5 mm × 37.5 mm |
| Weight | 72 g (without batteries) |
| Meter Storage Conditions | 0 – 50 ºC (32 – 122 ºF) |
| Operating Conditions | 2 – 40 ºC (35.6 – 104 ºF) |
| Working Humidity | 5 – 95% RH |
| Analyzer Port | USB Cable for Data Transfer & Power |
| Capabilities | USB Data Transfer to PC and Printer |
| Meter Warranty | 3 Years |
| Strip (Working Environment) | Working Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip (Storage Environment) | Storage Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip Shelf Life | 18 Months |
| Auto Calibration | Auto/Self Calibrations |
| Sensitivity | More than 80% |
| Specificity | More than 80% |
| Bias (Limits of Agreement) | 0.5 g/dL (±1gm/dL) |
| Accuracy | 98% |
| Reproducibility | CV : < 3% |
| Measurement Range | 0 – 25.6 g/dL, 0 – 256 g/L, 0 – 15.9 mmol/L |
| Sample | Whole blood (Capillary, Venous, Arterial) |
| Sample Volume | 10 µL |
| Power Source | 3 AAA Rechargeable Batteries (1.5V), AC Adapter (Mini USB, 5V DC, 1A) |
| Battery Life | 100 hours or 1000 tests |
| Units of Measure | g/dL, g/L, mmol/L |
| Memory | 1000 records with date and time |
| Strip (Working Environment) | Working Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip (Storage Environment) | Storage Temperature 2 – 40 ºC and Humidity 5 – 95% |
| Strip Shelf Life | 18 Months |
| Auto Calibration | Auto/Self Calibrations |
| Sensitivity | More than 80% |
| Specificity | More than 80% |
| Bias (Limits of Agreement) | 0.5 g/dL (±1gm/dL) |
| Accuracy | 98% |
| Reproducibility | CV : < 3% |
| Measurement Range | 0 – 25.6 g/dL, 0 – 256 g/L, 0 – 15.9 mmol/L |
| Sample | Whole blood (Capillary, Venous, Arterial) |
| Sample Volume | 10 µL |
Interface: Expansion of user interface through the adoption of Android OS
Display: 7 “touch panel provides operational stability and quick response
Portability: Battery for unexpected power failure or poor power environment for a certain period
Data storage and update: Available to store and search a large amounts of test results
Data backup and OS update using SD card
Colony Counters are used to estimate a liquid culture’s density of micro organisms by counting individual colonies on an agar plate, slide, mini gel, petri dish. Typical application includes Ames testing, Bacterial Mutation, Assays and E.Coli bacterial colonies.
SALIENT FEATURES
Ultrasonic Cleaner operates at 40kHz frequency. These high frequency sound waves convert the electrical energy into ultrasonic waves in the form of vibration by means of PEIZO transducers. The Accumulation of ultrasonic waves produces millions of microscopic cavitation bubbles. These cavitation bubbles drives the cleaning solution into components to be cleaned, removing away all the dirt and accumulated residues on them.
To measure the Absorbance and Tranmittance
Design & Specification are subject to change without any prior notice.
SALIENT FEATURES
Magnetic Stirrer is a compact, slim with magnetic coil technology designed. With an IP 65 protection class and the stirrer’s motor less design, our product offers quality performance with maintenance free. The last run feature allows for the restored program to resume operation after a power failure.
Features:
System Function:
General: Benchtop, automatic, discrete, random access, STAT sample priority
Throughput: Up to 120 tests per hour
Principle: Colorimetry and turbidimetry
Method: End-point, fixed-time, kinetic, etc.
Programming: Open or closed system on demand
Reagent/Sample handling
Reagent: 54 reagent positions
Sample: 27 sample positions
Reagent Volume: 10-300 μL, step by 1 μL
Sample Volume: 1-70 μL, step by 0.1 μL
Liquid level detection, vertical & horizontal collision detection
and reagent inventory monitoring
Probe Cleaning: Auto interior and exterior wash
Calibration and control:
Calibration: K-factor, Linear, Spline, Logit-Log
4P, Logit-Log 5P, Exponential, Polynomial
Control: Westgard multi-rule, Cumulative sum check,
Twin plot, L-J Chart
Operation system:
Computer: Built-in operation system
Screen: 10.4 inch color touch screen
Data Storage: 100,000 results
Printer: Built-in and external printer
Others: Soft keyboard Compatible with keyboard and mouse
Interface: Ethernet, USB, RS232, VGA, HDMI, etc
Water Consumption: ≤ 1.5 L/H
Reaction Tray: 81 reusable cuvettes,
Wavelength: 8 wavelengths: 340nm, 405nm,
450nm, 510nm, 546nm, 578nm, 630nm, 670nm
Absorbance: 0-4.5 Abs
Features
Fully Automated – Auto Sampling
Test Time – Less than 1 minute
Built in printer for results
Principle: Innovative microfluidic and micro sensor technology
Parameters Measured: pH, pO2, pCO2, Na, K, Ca, Cl, Glu, Lac, Hct
Sample types: Arterial, Venous, Capillary, Mixed, CPB, Aqueous
Triple Result Guarantee: Ensured with Calibrator, Control and Electronic simulator
12 Months Cartridge Shelf life
Micro sample – 140 µl
Zero maintenance
3 Part Veterinary Hematology Analyzer – VH30
Assays: 24 parameters(including WBC, Neu#, Lym#, Gran#, Neu%, Lym%, Gran%, RBC, HGB, HCT, MCV, MCH, MCHC, RDW-SD, RDW-CV, PLT, MPV, PDW-SD, PDW-CV, PCT, P-LCR, P-LCC, NLR, PLR)
18+ Species
Cat, Dog, Rabbit, Sheep, Goat, Cattle, Horse, Rat, Mouse, Llama, Deer, Musk deer, Monkey, Tiger, Dolphin, Pig, Camel, Ferret.
Reagents
2 Reagent (1 Lyse + 1 Diluent)
1 Probe cleanser for maintenance
Quick cell 5 Plus is an innovative, economical, compact hematology analyzer using advanced tri-angle laser scattering, flow cytometry technology that can be applied for detecting the parameters of WBC, RBC, PLT, HGB, etc. 28 parameters, 8 research parameters, and 2 histograms for RBC and PLT, 4 scattergrams for WBC differential) in whole blood or pre-diluted blood.
It is a perfect and cost-efficient solution for small to medium labs and clinics with limited budget space but requests accurate hematologic results.
**Applicable only for Indian Buyers: Price shown in RUPEES is inclusive of GST 18% , You will get the GST bifurcated details in the Tax Invoice
Sample Volume 100 μL (Capillary/Micro mode) Results with 1 Sample 27 different Result Sample Type Whole Blood, Serum, Plasma, CSF & Diluted Urine Parameters Blood Gas: pH, PCO2, pO2, Hct
Electrolytes: Na, K, Li, Cl, iCa
Metabolites: LGU, LAC
Calculated Parameter: Hb, HCO3, BE, BE-B, BE-ECF, TCO2, AG, AG(K), O2 Sat, O2 Ct, SBC, nCa, TCa, pO2%, A, AaDO2, a/A
Interface: Expansion of user interface through the adoption of Android OS
Display: 7 “touch panel provides operational stability and quick response
Portability: Battery for unexpected power failure or poor power environment for a certain period
Data storage and update: Available to store and search a large amounts of test results
Data backup and OS update using SD card
ECG300G is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management.
Function
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1×12+1, auto 1×12, rhythm 4, rhythm 3 and rhythm 2, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
5)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
ECG1200G is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting rhythm lead, printing the trend chart and histogram of P-R interval, case database management.
Function
1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.
3)Multiply printing modes and formats, including auto 12×1, auto 6×2+1, auto 6×2+1_H, auto 6×2, auto 6x2_H, auto 3×4+1, auto 3×4+2, rhythm 12, rhythm 10, rhythm 8, rhythm 6, manual, etc. Trend chart and histogram of P-R interval can be printed, waveform length printed can be adjusted, and with time print function, which meets different requirements.
4)Paper speed: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s.
5)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.
6)Built-in memory stores up to 1000 cases, convenient for case review and statistic.
7)In optimal DC state, up to 10-hour standby time, continuous print more than 3-hour, record up to 300 ECG waveform(commonly, it is 3s case), which meets the requirements of visiting a patient at home and body examination.
Lightweight, portable, compact and easy to use,
qLabs platform features:
TEST TUBE Made of superior quality, chemically inert, borosilicate glass Feature well-rounded bottoms and smooth, fire-polished rims Tubes are shrink-wrapped to keep them particle-free Safe Transport packaging prevents breakage of tubes during transport Packaging boxes are compact and designed to fit into most dispensers Test tubes
| Test Tubes BG with Rim | ||||
| S.No | Cat# | Size : Dia x Ht. | Appx. Capacity | Packing |
| 1 | QLBG 001 | 10 x 75 mm | 3ml | 100/ Box |
| 2 | QLBG 002 | 12 x 75 mm (1/2” x 3”) | 5ml | 100/ Box |
| 3 | QLBG 003 | 12 x 100 mm (1/2” x 4”) | 7ml | 100/ Box |
| 4 | QLBG 004 | 15 x 125 mm (5/8” x 5”) | 15ml | 100/ Box |
| 5 | QLBG 005 | 15 x 150 mm (5/8” x 6”) | 20ml | 100/ Box |
| 6 | QLBG 006 | 18 x 150 mm (3/4” x 6”) | 25ml | 100/ Box |
| 7 | QLBG 007 | 25 x 150 mm (1” x 6”) | 50ml | 50/ Box |
TEST TUBE Made of superior quality, chemically inert, borosilicate glass Feature well-rounded bottoms and smooth, fire-polished rims Tubes are shrink-wrapped to keep them particle-free Safe Transport packaging prevents breakage of tubes during transport Packaging boxes are compact and designed to fit into most dispensers Test tubes
| Test Tubes BG without Rim | ||||
| S.No | Cat# | Size : Dia x Ht. | Appx. Capacity | Packing |
| 1 | QLBG 008 | 10 x 75 mm | 3ml | 100/ Box |
| 2 | QLBG 009 | 12 x 75 mm (1/2” x 3”) | 5ml | 100/ Box |
| 3 | QLBG 010 | 12 x 100 mm (1/2” x 4”) | 7ml | 100/ Box |
| 4 | QLBG 011 | 15 x 125 mm (5/8” x 5”) | 15ml | 100/ Box |
| 5 | QLBG 012 | 15 x 150 mm (5/8” x 6”) | 20ml | 100/ Box |
| 6 | QLBG 013 | 18 x 150 mm (3/4” x 6”) | 25ml | 100/ Box |
| 7 | QLBG 014 | 25 x 150 mm (1” x 6”) | 50ml | 50/ Box |
BEAKERS
| Beakers Low form and Graduation | |||||||
| 1 | Cat # | QLBG 015 | QLBG 016 | QLBG 017 | QLBG 018 | QLBG 019 | QLBG 020 |
| 2 | Capacity | 5ml | 10ml | 25ml | 50ml | 100ml | 150ml |
| 1 | Cat # | QLBG 0210 | QLBG 023 | QLBG 025 | QLBG 026 | ||
| 2 | Capacity | 250ml | 500ml | 1000ml | 2000ml |
BOD ( Biological Oxygen Demand ) CLEAR Bottles with solid I/C stopper
BOD Bottles for incubating diluted samples of clean, waste, effluent, and polluted water during the 5-day biochemical oxygen demand (BOD) test.
Bottles are unnumbered and feature a penny head stopper.
Clear Borosilicate glass has a low coefficient of thermal expansion. Therefore, the thermal stresses under a given temperature gradient are low, and the glass can withstand higher temperature gradients as well as sudden temperature changes / thermal shocks.
| BOD ( Biological Oxygen Demand ) CLEAR Bottles with solid I/C stopper | |||
| S.No | Capacity | Cat# | Units/ Packet |
| 1 | 125ml | QLBG 039 | 1 |
| 2 | 175ml | QLBG 040 | 1 |
| 3 | 300ml | QLBG 041 | 1 |
BOD ( Biological Oxygen Demand ) AMBER Bottles with solid I/C stopper
BOD Bottles for incubating diluted samples of clean, waste, effluent, and polluted water during the 5-day biochemical oxygen demand (BOD) test.
Bottles are unnumbered and feature a penny head stopper.
Amber Borosilicate glass has a low coefficient of thermal expansion. Therefore, the thermal stresses under a given temperature gradient are low, and the glass can withstand higher temperature gradients as well as sudden temperature changes / thermal shocks.
| BOD ( Biological Oxygen Demand ) AMBER Bottles with solid I/C stopper | |||
| S.No | Capacity | Cat# | Units/ Packet |
| 1 | 125ml | QLBG 042 | 1 |
| 2 | 175ml | QLBG 043 | 1 |
| 3 | 300ml | QLBG 044 | 1 |
Dropping bottle is equipped with an eye dropper pipette for clean dispensing of the stored contents.
The clear glass allows for maximum visibility and display of contents. Three piece pipette section, comprising of a glass eye dropper, high density polyethylene octagonal stopper and dust proof head with rubber teat.
Suitable for a variety of applications in the household, classroom or laboratory. Excellent for chemistry applications, transferring and mixing indicators, stains or other aqueous solutions.
| DROPPING BOTTLES: With I/C dropper & R. teat | |||
| S.No | Capacity | Cat# | Units/ Packet |
| 1 | 30ml | QLBG 045 | 1 |
| 2 | 60ml | QLBG 046 | 1 |
| 3 | 125ml | QLBG 047 | 1 |
Lab bottles Blue Capped: Laboratory reusable bottles are ideal for sample preparation, storage, transport, and sterilization.
These are Wide Mouth (Mouth dia same in all capacities) with threaded Polypropylene
screw cap (totally leak proof)
Manufactured from 3.3 borosilicate glass for high resistance to thermal shock, superior chemical compatibility, and transparency.
Fired-on durable white ceramic graduations with easy-to-read scale for accurate measurements.
Large labeling spot for easy identification.
Includes polypropylene (PP) screw cap for sample protection and pouring ring for drip-free pouring.
The service temperature level of the screw cap and pouring ring: +140°C.
| LAB BOTTLES: Blue Capped Bottles | |||
| S.No | Capacity | Cat# | Units/ Packet |
| 1 | 25ml | QLBG 046 | 1 |
| 2 | 50ml | QLBG 047 | 1 |
| 3 | 60ml | QLBG 048 | 1 |
| 4 | 100ml | QLBG 049 | 1 |
| 5 | 250ml | QLBG 050 | 1 |
| 6 | 500ml | QLBG 051 | 1 |
| 7 | 1000ml | QLBG 052 | 1 |
| S.No | Capacity | Cat# |
| 1 | 30ml | QLRBCN30 |
| 2 | 60ml | QLRBCN60 |
| 3 | 125ml | QLRBCN125 |
| 4 | 250ml | QLRBCN250 |
| 5 | 500ml | QLRBCN500 |
| 6 | 1000ml | QLRBCN1L |
| 7 | 2000ml | QLRBCN2L |
| S.No | Capacity | Cat# |
| 1 | 30ml | QLBG 060 |
| 2 | 60ml | QLBG 061 |
| 3 | 125ml | QLBG 062 |
| 4 | 250ml | QLBG 063 |
| 5 | 500ml | QLBG 064 |
| 6 | 1000ml | QLBG 065 |
Amber Reagent Bottles, Plain, Narrow Mouth, Graduated with Interchangeable Flat Head Solid Glass Stopper
Ground neck Borosilicate glass Durable Matt finish
| S.No | Capacity | Cat# |
| 1 | 30ml | QLBG 066 |
| 2 | 60ml | QLBG 067 |
| 3 | 125ml | QLBG 068 |
| 4 | 250ml | QLBG 069 |
| 5 | 500ml | QLBG 070 |
| 6 | 1000ml | QLBG 071 |
specific–gravity bottle. A small bottle or flask used to measure the specific gravities of liquids; the bottle is weighed when it is filled with the liquid whose specific gravity is to be determined, when filled with a reference liquid, and when empty. Also known as density bottle; relative-density bottle.
The density bottles (pycnometers) are individually adjusted. The nominal capacity is indelibly engraved on each bottle. Each bottle is calibrated with its own stopper. The volume in cm3 is specified to a precision of 3 decimal places.
| SPECIFIC GRAVITY BOTTLES : With capillary bore I/C stopper | |||
| S.No | Capacity | Cat# | Units/ Packet |
| 1 | 10ml | QLBG 073 | 1 |
| 2 | 25ml | QLBG 074 | 1 |
| 3 | 50ml | QLBG 075 | 1 |
Weighing bottles are glass laboratory equipment used for precise weighing of solids. Most of the glass used in the bottles is thin and fragile glass
Available in low-, regular- and tall-form, weighing bottles are typically manufactured from glass for the precise weighing of solids.
| WEIGHING BOTTLES: With I/C stopper | |||
| S.No | Capacity | Cat# | Units/ Packet |
| 1 | 25 x 60mm ( 15ml) | QLBG 076 | 1 |
| 2 | 30 x 65mm (25ml) | QLBG 077 | 1 |
Specification are subject to change without notice.
Specification are subject to change without notice.
Microprocessor Based Turbidity Meter
LCD Backlight Display 16X2 Alphanumeric
2 Point calibration Distiller water & 200 NTU
Soft Touch Keypad
Test Tube Set
Operating Manual
Specification are subject to change without notice.
12.5 mm Round Test Tube – 5 Nos.
Test Tube Holder – 1 No
Operating Manual
Design & Specification are subject to change without any prior notice.
To measure the Absorbance and Tranmittance
Design & Specification are subject to change without any prior notice.
QUICKLAB Probesonicator Homogenizers offer precision engineering with all the necessary features to create a total system for ultrasonic disruption. In biological applications, Probe Sonicator is often used to disrupt cell membrances and release cellular Contents. Probe Sonicator is also used to fragment molecules of DNA. Probe sonicator is commonly used in nanotechnology for evenly dispersing nanoparticles in liquids and for breaking down particles to nano size.
SALIENT FEATURES
SALIENT FEATURES
Ultrasonic Cleaner operates at 40kHz frequency. These high frequency sound waves convert the electrical energy into ultrasonic waves in the form of vibration by means of PEIZO transducers. The Accumulation of ultrasonic waves produces millions of microscopic cavitation bubbles. These cavitation bubbles drives the cleaning solution into components to be cleaned, removing away all the dirt and accumulated residues on them.
SALIENT FEATURES
Colony Counters are used to estimate a liquid culture’s density of micro organisms by counting individual colonies on an agar plate, slide, mini gel, petri dish. Typical application includes Ames testing, Bacterial Mutation, Assays and E.Coli bacterial colonies.
