iLab, Scientific Equipment's
Vortex Mixer IMIX-2850
- Continuous & touch operation.
- Orbital diameter of 4mm.
- long-life brushless AC motor with ball bearing.
- Adjustable speed ranging up to 2850 RPM.
- Silent operation.
- Broad range of Accessories( Optional ).
₹13,600.00 ₹17,850.00
I mix -2850 vortex mixer is designed for laboratory mixing. the vortex mixer has a variable speed with the control that allows low RPM start-up for gentle shaking and high-speed mixing for vigorous vortexing of samples.
| Weight | 3.5 kg |
|---|---|
| Dimensions | 25 × 20 × 15 cm |
| GTIN | |
| HSN Code |
You must be logged in to post a review.
Q & A
Ask a question
There are no questions yet
Related products
-
Scientific Equipment's
Visible Spectrometer – Single Beam
Salient Features
- Wavelength can set manually from the dial on the front panel
- The Monochromator with a holographic flashing grating is used.
- Digital display the measuring value
- It has the advantage of high wavelength precision, good monochromaticity and low stray light.
- A sample compartment is equipped with 50 mm cell holder
- Direct concentration read โ out
- Concentration factor setting function.
- RS232C Interface
SKU: QLVS230 -
Scientific Equipment's
Double Beam UV-VIS Spectrophotometer
Basic Mode :
To measure the Absorbance and Tranmittance
Quantitative :
- Coefficient Method
2. Standard Curve Up to 10 Standard sample may be used to establish a curve. Four methods for fitting a curve through the calibration points : Linear fit. Linear fit through zero, Square fit and cubic fit.
Wavelength Scan :
- The wavelength scan intervals are 0.1,0.2,0.5,1,2 & 5 nm
2. Fast, Medium and Slow scan speed are available. They vary from 100 to
3600 nm/min
3. Wavelength are scanned from high to low so that the instrument waits at high.
Wavelength and it minimizes the degradation of UV sensitive samples.
Design & Specification are subject to change without any prior notice.
SKU: QLUV2100 - Coefficient Method
-
-
Scientific Equipment's
pH Meter Microprocessore based
Salient Features
- pH meter is most commonly used to determine the pH value of unknown solution.
- KLPHM โ 114 upto 3 point push button calibration with auto-buffer recognition.
- KLPHM โ 116 it is 5 point Push button Calibration with auto-buffer recognition.
- Automatic Slope value calculations as all model is Microprocessor based.
- Automatic Temperature Compensation (ATC) ensures highly accurate measurements over the entire range.
- Expanded memory stores and reading to recall
-
Specification are subject to change without notice.
SKU: QLPHM -
Reviews
There are no reviews yet