Scientific Equipment's
CERAMIC HOTPLATE MAGNETIC STIRRER
- Digital LCD Display with back light
- Heating and stirring can proceed simultaneously
- Heating power and stirring speed is stepless display on screen simultaneously
- Ceramic hot plate with flame protection Fast warmup and durability
- Stretched Shell and Cover prevent leaking
- Double sensor outer PT 100 temperature sensor to control liquid temperature precisely inner K
model sensor to control hot plate temperature.
₹32,500.00 ₹46,320.00
MAGNETIC STIRRER
| Weight | 6 kg |
|---|---|
| Dimensions | 43 × 28 × 28 cm |
| HSN Code | |
| GTIN |
You must be logged in to post a review.
Q & A
Ask a question
There are no questions yet
Related products
-
Scientific Equipment's
Visible Spectrometer – Single Beam
Salient Features
- Wavelength can set manually from the dial on the front panel
- The Monochromator with a holographic flashing grating is used.
- Digital display the measuring value
- It has the advantage of high wavelength precision, good monochromaticity and low stray light.
- A sample compartment is equipped with 50 mm cell holder
- Direct concentration read โ out
- Concentration factor setting function.
- RS232C Interface
SKU: QLVS230 -
Scientific Equipment's
Double Beam UV-VIS Spectrophotometer
Basic Mode :
To measure the Absorbance and Tranmittance
Quantitative :
- Coefficient Method
2. Standard Curve Up to 10 Standard sample may be used to establish a curve. Four methods for fitting a curve through the calibration points : Linear fit. Linear fit through zero, Square fit and cubic fit.
Wavelength Scan :
- The wavelength scan intervals are 0.1,0.2,0.5,1,2 & 5 nm
2. Fast, Medium and Slow scan speed are available. They vary from 100 to
3600 nm/min
3. Wavelength are scanned from high to low so that the instrument waits at high.
Wavelength and it minimizes the degradation of UV sensitive samples.
Design & Specification are subject to change without any prior notice.
SKU: QLUV2100 - Coefficient Method
-
-
Reviews
There are no reviews yet