Leak Test Apparatus
- Ideal instrument to check blister packs, strip for leak test.
- The instrument is equipped with long lasting diaphram vacuum pump which gives higher lever of vacuum in shortest possible time.
- Dia pressed polycabonate vacuum dessicator sustains vacuum for long time.
- A vacuum gauge is provided to indicate vacuum level which is connected to isolation valve to disconnect the source, thus avoiding the need of continous running of vacuum pump.
- A 0-5 minutes digital timer helps the operator to do other works.
- Complete in GMP. stainless steel body with phenomenal compactness.
Compare
You may also like…
-
Laboratory instruments
Flash Point Apparatus
- It consist of brass test cup. Cup over and spring loaded rotating shutter, pilot jet stirrer with flexible shaft.
- Assembly on air covered with dome shaped metal top.
- Cup is fitted with insulated handle and locking arrangement near the cup Lange.
- Round electric heater is provided with temp regulator. To work on 220V AC.
SKU: FPA22 -
Laboratory instruments
Industrial Air Curtain
- Offered by us are superior qualities industrial air curtains are used to create a curtain of air between air-conditioned and clean room to adjoining room.
- Widely used in various industries like, hospitals, hotels, and showrooms etc, these quality-tested Air Curtains are offered in varied specifications and that too at very affordable prices.
- This high end machinery ably creates an invisible barrier of high velocity air which provides complete protection against insects, dust, dirt and fumes.
SKU: IAC01 -
Laboratory instruments
Bone and Meat Cutting Machine
- Useful for preparing specimen of big size in anatomy and meat departments.
- Fitted with large moving table and extension table operated on four ball-bearing rollers.
- Used extensively in the meat packing and wholesale fish industry for handling sword fish and large halibuts etc.
- The table is made of thick S.S. Sheet with special heavy axles for easy and firm movement.
- Supplied complete with one blade, starter, cord and plug, work on 220 V, single phase, AC supply.
SKU: BMC50
Related products
-
Laboratory instruments
Humidity Chamber
- Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild
steel duly painted in powder coated paint or stoving paint. - Temperature range 5ยฐC to 55ยฐC + 2ยฐC and humidity from 55% to 95% +3% Rh.
- Stainless steel water reservoirs heated by immersion heaters provide humidity complete with all accessories.
SKU: HC95 - Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild
-
Laboratory instruments
Muffle Furnace – Industrial Model
- Outer shell made out of thick mild steel sheet duly finished in stoving enamel paint.
- Fitted with Muffle Block for supporting heating elements working temperature 1100ยฐC controlled by superior energy regulator or digital temperature controller cum indicator.
- Maximums temperature 1150ยฐC. Complete with CI/AL thermocouple with pyrometer, High clamp panel with include voltmeter, MCBs, Light, thermal fuse etc.
SKU: MFIM9 -
Laboratory instruments
Seed Drier
Seed drier is the equipment which is used to dry the seeds in the bad weather conditions and helps to retain high value of seed in the market.
Technical Data:
- Triple wall construction.
- Outer body made of thick mild steel sheet duly painted in powder coated / stoving or hammer tone paint inner working chamber made of highly polished stainless steel sheet.
- Temperature range +5ยฐ Ambient to 70ยฐC.
- Controlled by microprocessor based digital temperature controller cum indicator with inbuilt timer.
- Constant air circulation in the chamber to circulate heat in the chamber and to maintain equal temperature on all sides.
- Easily replaceable tubular elements.
- Mobile movement through castor wheels and good locking system.
- With two wire mesh trays.
SKU: SD48 -
Laboratory instruments
Deep Freezer, -20ยฐC
- Double wall construction with PUF insulation between inner and outer wall.
- Refrigeration system through hermitically sealed compressor inner high grade stainless steel outer made of mild steel sheet duly painted in powder coated paint.
- Temperature range upto -20ยฐC controlled by microprocessor based digital temperature controlled cum indicator.
SKU: DF20 -
Laboratory instruments
Seed Germinator
Cabinet Construction : Inner chamber made of highly grade rust tree stainless steel design and outer made of mild steel powder coated on stoving paint. Door opening provides full access to the chamber interior. A magnetic gasket provides a tight seal to door frame. A second internal glass door provides observation window with out disturbing the internal atmosphere. Shelving tiers of white epoxy coated aluminum.
Refrigeration : Cooling for seed germinations is provided by a self contained air-cooled condensing unit with hot gas bypass for continuous compressor operation.
Humidification: Humidification system is a centrifugal humidifier. Centrifugal atomizing humidifiers must be supplied with clean water.
Control System: Microprocessor based digital temperature controller with Graphic LCD display, capable of programming temperature, humidity and light intensity. PID controlled base system, relative humidity sensor is also provided.
SKU: SG10
Reviews
There are no reviews yet