Paraffin Embedding Bath
- Double wall construction, inner made out of stainless steel and outer made of mild steel sheet duly finished in powder
coating paint. - Temp, range ambient to 80°C ±1°C and is controlled by a thermostat with cups and sleeves for glass tube. To work on 220V AC.
Compare
You may also like…
-
Laboratory instruments
Dry Bath Incubator
- Digital, 24 holes for 12mm tubes, +5°C above ambient to 70°C.
- Temperature sensor PT-100.
- Maximum heating power 125W, Temperature Controller PID, Timer 1 min to 99 minutes, LCD Display for time & temperature, Anodized Aluminum block 220V AC, Available with Buzzer alarm & overheat protection.
SKU: DBI12 -
Laboratory instruments
Mortuary Chamber
- Double wall construction inner stainless steel and outer mild steel duly painted with rust proof paint.
- Trays travel on rollers fitted with ball bearing, trays made of stainless sheet to carry bodies are provided with handles.
- Temperature Range 2C to 5°C controlled by digital temperature controller cum indicator to work on 220 Volts AC Supply.
SKU: MC3 -
Laboratory instruments
Thermostatic Water Bath – Rectangular Double Wall
- Double wall construction, inner made out of stainless steel sheet and outer made of mild controlled by a thermostat.
- Concentric rings have been provided on holes to accommodated various sizes of container/vessels.
- To work on 220 VAC.
SKU: RDW8
Related products
-
Laboratory instruments
Stability Chamber
- Standard Double wall construction inner/outer chamber made out of highly polished stainless steel sheet of 304 grade.
- Temperature range 10°C to 60°C + 0.5°C and humidity from 35% to 95% or less RH controlled by Microprocessor
based PID type digital controlled. - Digital LCD display.
- Microprocessor based PID temperature controller cum indicator.
- Microprocessor based PID humidity controller cum indicator.
- Low water cut off.
SKU: SC125 -
Laboratory instruments
Environmental Chamber (Humidity Cabinet Delux)
- Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity.
- Inner chamber and trays are made of stainless steel (S.S.-304 Grade).
- Outer wall of mild steel sheet duly powder coated.
- Mounted on caster wheels for easy portability.
- High grade glass wool insulation between outer and inner chamber for minimal thermal loss.
- Front double walled door is provided with lock and key arrangement.
- A self-cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber.
SKU: HCD112 -
Laboratory instruments
Orbital Shaking Incubator (B.O.D Type)
- Standard double construction.
- Exterior made out of mild steel sheet duly finished in powder coating paint.
- Inner chamber made of highly polished stainless steel sheet.
- Double door with glass window.
- Inter changeable platform has been provided temp. range 5°C to 60°C + 1°C is controlled by a digital controller.
- Variable speed control regulator to control speed upto 200 rom provided.
SKU: OSI250 -
Laboratory instruments
Seed Germinator
Cabinet Construction : Inner chamber made of highly grade rust tree stainless steel design and outer made of mild steel powder coated on stoving paint. Door opening provides full access to the chamber interior. A magnetic gasket provides a tight seal to door frame. A second internal glass door provides observation window with out disturbing the internal atmosphere. Shelving tiers of white epoxy coated aluminum.
Refrigeration : Cooling for seed germinations is provided by a self contained air-cooled condensing unit with hot gas bypass for continuous compressor operation.
Humidification: Humidification system is a centrifugal humidifier. Centrifugal atomizing humidifiers must be supplied with clean water.
Control System: Microprocessor based digital temperature controller with Graphic LCD display, capable of programming temperature, humidity and light intensity. PID controlled base system, relative humidity sensor is also provided.
SKU: SG10 -
Laboratory instruments
Muffle Furnace – Laboratory Model
- Outer shell made out of thick mild steel sheet duly finished in stoving enamel paint.
- Fitted with Muffle Block for supporting heating elements working temperature 900°C controlled by superior energy regulator or digital temperature controller cum indicator.
- Maximums temperature 1000°C. Complete with CI/AL thermocouple with pyrometer, thermal fuse etc.
SKU: MFLM9
Reviews
There are no reviews yet