Vortex Shaker – Test Tube Shaker
- Fitted with neoprene rubber cup mounted eccentrically on the shaft.
- Speed control arrangement provided. To work on 220V AC.
Compare
You may also like…
-
Laboratory instruments
Dry Bath Incubator
- Digital, 24 holes for 12mm tubes, +5°C above ambient to 70°C.
- Temperature sensor PT-100.
- Maximum heating power 125W, Temperature Controller PID, Timer 1 min to 99 minutes, LCD Display for time & temperature, Anodized Aluminum block 220V AC, Available with Buzzer alarm & overheat protection.
SKU: DBI12 -
Laboratory instruments
Water Bath Incubator Shaker – Metabolic Shaking Incubator
- Standard Double wall construction, inner made of highly polished stainless steel sheet exterior made of mild steel duly
finished in powder coating paint. - Temp, range ambient to 100°C thermostatically controlled or digital temperature control accuracy ± 5°C.
- Oscillating tray on ball rollers. Shaking speed 40-140 rom. To work on 220V AC.
SKU: MSI12 - Standard Double wall construction, inner made of highly polished stainless steel sheet exterior made of mild steel duly
-
Laboratory instruments
Seed Drier
Seed drier is the equipment which is used to dry the seeds in the bad weather conditions and helps to retain high value of seed in the market.
Technical Data:
- Triple wall construction.
- Outer body made of thick mild steel sheet duly painted in powder coated / stoving or hammer tone paint inner working chamber made of highly polished stainless steel sheet.
- Temperature range +5° Ambient to 70°C.
- Controlled by microprocessor based digital temperature controller cum indicator with inbuilt timer.
- Constant air circulation in the chamber to circulate heat in the chamber and to maintain equal temperature on all sides.
- Easily replaceable tubular elements.
- Mobile movement through castor wheels and good locking system.
- With two wire mesh trays.
SKU: SD48
Related products
-
Laboratory instruments
Seed Germinator – Double Chamber
Cabinet Construction :- Inner chamber made of highly grade rust tree stainless steel design and outer made of mild steel powder coated on stoving paint. Door opening provides full access to the chamber interior. A magnetic gasket provides a tight seal to door frame. A second internal glass door provides observation window with out disturbing the internal atmosphere. Shelving tiers of white epoxy coated aluminum.
Refrigeration :- Cooling for seed germinations is provided by a self-contained air-cooled condensing unit with hot gas bypass for continuous compressor operation.
Humidification:- Humidification system is a centrifugal humidifier. Centrifugal atomizing humidifiers must be supplied with clean water.
Control System :- Microprocessor based digital temperature controller with Graphic LCD display, capable of programming temperature, humidity and light intensity. PID controlled base system, relative humidity sensor is also provided.
SKU: SDDC20 -
Laboratory instruments
Bacteriological Incubators – Deluxe Model
- Standard Double wall construction inner stainless steel & Outer body made of mild steel duly powder coated
- The gap between the two wall will be filled by high grade glass wool of 75mm to avoid thermal loss.
- Bided heating elements are placed in bottom and two sides (Ribs) made of kanthal a one wire (best quality wire in India).
- Chamber is provided with groves to hold shelves and to adjust shelves according to the requirement.
- Temperature range +5°C ambient to 90°C controlled by Microprocessor Based PID type digital controller cum indicator.
SKU: Bid28 -
Laboratory instruments
Stability Chamber
- Standard Double wall construction inner/outer chamber made out of highly polished stainless steel sheet of 304 grade.
- Temperature range 10°C to 60°C + 0.5°C and humidity from 35% to 95% or less RH controlled by Microprocessor
based PID type digital controlled. - Digital LCD display.
- Microprocessor based PID temperature controller cum indicator.
- Microprocessor based PID humidity controller cum indicator.
- Low water cut off.
SKU: SC125 -
Laboratory instruments
Oven Industrial (Drier)
- Double wall construction body is fabricated on heavy duty angle channel frame outer & inner made of Mild Steel sheet.
- The Gap between the two wall of 75mm is filled with high temperature resistant glass wool.
- Temperature range +10° Ambient to 300° C controlled by digital temperature controller cum indicator with inbuilt timer.
SKU: Oid36 -
Laboratory instruments
Hot Air Universal Oven (Memmert Type)
- Standard double wall construction.
- Outer made of mild steel duly enamel painted or powder coated paint, inner made out of anodized aluminum or stainless steel sheet.
- Heating elements provided at bottom & two sides temperature controlled by hydraulic type of thermostat or Digital temperature controller.
- Temperature +5°C Ambient to 250°C with accuracy +1°C. To work on 220V.
SKU: HUO28
Reviews
There are no reviews yet