Laboratory instruments
Slide Cabinet
- We are manufactures of slide cabinets that are safe and easy to handle, manufacture using optimum quality ply board sheet laminated with sunmica.
- Further, an anodized aluminum slide tray for holding 75 x 25mm slide has been arranged separately to as not to disturb other compartments while taking out or putting in slides.
- Our range is known for its sturdy construction and is available in various size and specifications.
Compare
You may also like…
-
Laboratory instruments
Laminar Air Flow Cabinet Horizontal
- Laminar flow principle involves double filtration of air through pre-filters (upto 5 microns) and hepa filters (down to 0.3 microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface.
- Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAC3 -
Laboratory instruments
High Precision Water Bath
- Double wall construction, inner made out of stainless steel sheet and outer made of mild steel sheet duly finished in
stoving enamel paint or powder coated. - Glass window provided on opposite sides, A high speed regulated stirrer provided.
- Temp control is attained by a mercury contact thermometer or digital temperature controller with a Temp.
- Range ambient to 100°C ±1°C. To work on 220 VAC.
SKU: HPWB24 - Double wall construction, inner made out of stainless steel sheet and outer made of mild steel sheet duly finished in
-
Laboratory instruments
Water Distillation – QUARTZ (Horizontal Model)
- Replaceable Silica Heater: The Horizontal Quartz Jacket is fitted with removable silica heater and screw threaded connectors for ease of cleaning when scaling is formed.
- Distillate temperature is around 25 to 45°C which is ensured by an efficient condenser.
- The stand is powder coated for rust free operation and lustrous appearance.
- The unit automatically switches off if water level in the boiler falls below heater.
- Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy.
- Electrical Power: 220/240 V, 50/60Hz, Single Phase Supply.
- Boiler is provided with Teflon Screw Cork for easy draining and cleaning of boiling chamber.
SKU: WDQ2
Related products
-
Laboratory instruments
Hot Air Universal Oven (Memmert Type)
- Standard double wall construction.
- Outer made of mild steel duly enamel painted or powder coated paint, inner made out of anodized aluminum or stainless steel sheet.
- Heating elements provided at bottom & two sides temperature controlled by hydraulic type of thermostat or Digital temperature controller.
- Temperature +5°C Ambient to 250°C with accuracy +1°C. To work on 220V.
SKU: HUO28 -
Laboratory instruments
Stability Chamber
- Standard Double wall construction inner/outer chamber made out of highly polished stainless steel sheet of 304 grade.
- Temperature range 10°C to 60°C + 0.5°C and humidity from 35% to 95% or less RH controlled by Microprocessor
based PID type digital controlled. - Digital LCD display.
- Microprocessor based PID temperature controller cum indicator.
- Microprocessor based PID humidity controller cum indicator.
- Low water cut off.
SKU: SC125 -
Laboratory instruments
Oven Industrial – Tray Drier
- Body is fabricated on heavy duty angle channel frame with outer body made of Mild Steel sheet dully painted in hammer
tone paint or in powder coating paint and inner body made of Stainless Steel sheet. - The 75mm gap between the two walls will be filled by high grade temperature resistant glass wool as a insulation.
- Air circulation fan blade motor is given to circulate the heat in the chamber and to maintain equal temperature on all sides.
- Temperature range +5°C ambient to 200°C controlled by digital temperature controller cum indicator with a high class panel attached on the body.
SKU: Td16 - Body is fabricated on heavy duty angle channel frame with outer body made of Mild Steel sheet dully painted in hammer
-
Laboratory instruments
Mortuary Chamber
- Double wall construction inner stainless steel and outer mild steel duly painted with rust proof paint.
- Trays travel on rollers fitted with ball bearing, trays made of stainless sheet to carry bodies are provided with handles.
- Temperature Range 2C to 5°C controlled by digital temperature controller cum indicator to work on 220 Volts AC Supply.
SKU: MC3 -
Laboratory instruments
Muffle Furnace – Industrial Model
- Outer shell made out of thick mild steel sheet duly finished in stoving enamel paint.
- Fitted with Muffle Block for supporting heating elements working temperature 1100°C controlled by superior energy regulator or digital temperature controller cum indicator.
- Maximums temperature 1150°C. Complete with CI/AL thermocouple with pyrometer, High clamp panel with include voltmeter, MCBs, Light, thermal fuse etc.
SKU: MFIM9
Reviews
There are no reviews yet