Laboratory instruments
Activity Cage – Acto Photometer
- This instrument is designed with the modern state of art technology incorporating LSI Electronic digital circuitry.
- The chamber for the animal is made out of clear perspex sheet fitted with grill of nickel plated brass rods placed 3/16” apart.
- An build variable shock arrangement of strength 100v, 50ma is provided in the instrument.
- Also a four digit counter is provided which counts the movement of the animal, inside the persoex chamber.
- The counter is provided with a reset switch.
Compare
You may also like…
-
Laboratory instruments
Fume Hood
- Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personal and equipment in the laboratories.
- A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in high up atmosphere through ducting.
- Fabricated out of thick ply board clad from outside with laminated sheet and inside finished in non- corrosive epoxy paint.
- An up-down sliding sash with glass sheet is provided.
- Flurescent lighting is also provided.
- A gas tap, water tap and wash basin is also provided.
SKU: FHR3 -
Laboratory instruments
Laminar Air Flow Vertical
- Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface. - Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAV3 - Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
Related products
-
Laboratory instruments
Bacteriological Incubators – Deluxe Model
- Standard Double wall construction inner stainless steel & Outer body made of mild steel duly powder coated
- The gap between the two wall will be filled by high grade glass wool of 75mm to avoid thermal loss.
- Bided heating elements are placed in bottom and two sides (Ribs) made of kanthal a one wire (best quality wire in India).
- Chamber is provided with groves to hold shelves and to adjust shelves according to the requirement.
- Temperature range +5°C ambient to 90°C controlled by Microprocessor Based PID type digital controller cum indicator.
SKU: Bid28 -
Laboratory instruments
B.O.D. Incubator (Bio-chemical Oxygen Demand)
- Double walled construction, inner made out of highly polished stainless steel sheet, outer made of mild steel sheet duly
finished in stoving enamel paint or powder coating pain provided with magnetic gasket. - Inner door is made of transparent acrylic sheet or operated inner illumination has been provided.
- Castor wheels are also provided.
- Temperature range 5°C to 50°C + 1°C is controlled by digital temp.
- Controller cum indicator standard cooling unit is installed for low temperature working, inner air circulation system also provided.
- A control panel with indicators equipment to work on 220V AC.
- Digital Temperature Indicator cum Controller with LED display OR Microprocessor based.
SKU: BCI64 - Double walled construction, inner made out of highly polished stainless steel sheet, outer made of mild steel sheet duly
-
Laboratory instruments
Hot Air Universal Oven (Memmert Type)
- Standard double wall construction.
- Outer made of mild steel duly enamel painted or powder coated paint, inner made out of anodized aluminum or stainless steel sheet.
- Heating elements provided at bottom & two sides temperature controlled by hydraulic type of thermostat or Digital temperature controller.
- Temperature +5°C Ambient to 250°C with accuracy +1°C. To work on 220V.
SKU: HUO28 -
Laboratory instruments
Muffle Furnace – Industrial Model
- Outer shell made out of thick mild steel sheet duly finished in stoving enamel paint.
- Fitted with Muffle Block for supporting heating elements working temperature 1100°C controlled by superior energy regulator or digital temperature controller cum indicator.
- Maximums temperature 1150°C. Complete with CI/AL thermocouple with pyrometer, High clamp panel with include voltmeter, MCBs, Light, thermal fuse etc.
SKU: MFIM9 -
Laboratory instruments, Medical Equipments
Bacteriological Incubator
Features:
- Bacterialogical Incubator is sturdy, double walled with doors, Inner chamber made of Stainless steel
- Door fitted with Double glass window and heavy stainless hinges facilities inspection of samples without opening the door
- Transparent glass door let viewing the specimen inside without disturbing chamber temperature.
- The outer body is of thick mild steel sheet with attractively finished in powder coating for durable operation.
- Inner space in between the walls is filled with 2.5″ fine glass wool installation to minimize the loss between the walls
- The Temperature is controlled by a capillary thermostat variable from +5 degree celsius above ambient upto 80 degree celsius with a sensitivity of +/- 2 degree celsius
- Inner chamber accomodates easily removable stainless steel perforated trays adjustable air ventilator is provided at the top
- Supplied complete with trays, air ventilators, pilot lamps indicating lamps on/off switch, thermostat & cord and plug
- Suitable to operate on 220V, 50H, AC supply
SKU: n/a
Reviews
There are no reviews yet