Activity Cage – Acto Photometer
- This instrument is designed with the modern state of art technology incorporating LSI Electronic digital circuitry.
- The chamber for the animal is made out of clear perspex sheet fitted with grill of nickel plated brass rods placed 3/16” apart.
- An build variable shock arrangement of strength 100v, 50ma is provided in the instrument.
- Also a four digit counter is provided which counts the movement of the animal, inside the persoex chamber.
- The counter is provided with a reset switch.
Compare
You may also like…
-
Laboratory instruments
Fume Hood
- Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personal and equipment in the laboratories.
- A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in high up atmosphere through ducting.
- Fabricated out of thick ply board clad from outside with laminated sheet and inside finished in non- corrosive epoxy paint.
- An up-down sliding sash with glass sheet is provided.
- Flurescent lighting is also provided.
- A gas tap, water tap and wash basin is also provided.
SKU: FHR3 -
Laboratory instruments
Laminar Air Flow Vertical
- Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface. - Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAV3 - Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
Related products
-
Laboratory instruments
Seed Drier
Seed drier is the equipment which is used to dry the seeds in the bad weather conditions and helps to retain high value of seed in the market.
Technical Data:
- Triple wall construction.
- Outer body made of thick mild steel sheet duly painted in powder coated / stoving or hammer tone paint inner working chamber made of highly polished stainless steel sheet.
- Temperature range +5° Ambient to 70°C.
- Controlled by microprocessor based digital temperature controller cum indicator with inbuilt timer.
- Constant air circulation in the chamber to circulate heat in the chamber and to maintain equal temperature on all sides.
- Easily replaceable tubular elements.
- Mobile movement through castor wheels and good locking system.
- With two wire mesh trays.
SKU: SD48 -
Laboratory instruments
Bacteriological Incubators – Deluxe Model
- Standard Double wall construction inner stainless steel & Outer body made of mild steel duly powder coated
- The gap between the two wall will be filled by high grade glass wool of 75mm to avoid thermal loss.
- Bided heating elements are placed in bottom and two sides (Ribs) made of kanthal a one wire (best quality wire in India).
- Chamber is provided with groves to hold shelves and to adjust shelves according to the requirement.
- Temperature range +5°C ambient to 90°C controlled by Microprocessor Based PID type digital controller cum indicator.
SKU: Bid28 -
Laboratory instruments
Seed Germinator – Double Chamber
Cabinet Construction :- Inner chamber made of highly grade rust tree stainless steel design and outer made of mild steel powder coated on stoving paint. Door opening provides full access to the chamber interior. A magnetic gasket provides a tight seal to door frame. A second internal glass door provides observation window with out disturbing the internal atmosphere. Shelving tiers of white epoxy coated aluminum.
Refrigeration :- Cooling for seed germinations is provided by a self-contained air-cooled condensing unit with hot gas bypass for continuous compressor operation.
Humidification:- Humidification system is a centrifugal humidifier. Centrifugal atomizing humidifiers must be supplied with clean water.
Control System :- Microprocessor based digital temperature controller with Graphic LCD display, capable of programming temperature, humidity and light intensity. PID controlled base system, relative humidity sensor is also provided.
SKU: SDDC20 -
Laboratory instruments
Oven Industrial (Drier)
- Double wall construction body is fabricated on heavy duty angle channel frame outer & inner made of Mild Steel sheet.
- The Gap between the two wall of 75mm is filled with high temperature resistant glass wool.
- Temperature range +10° Ambient to 300° C controlled by digital temperature controller cum indicator with inbuilt timer.
SKU: Oid36 -
Laboratory instruments
B.O.D. Incubator (Bio-chemical Oxygen Demand)
- Double walled construction, inner made out of highly polished stainless steel sheet, outer made of mild steel sheet duly
finished in stoving enamel paint or powder coating pain provided with magnetic gasket. - Inner door is made of transparent acrylic sheet or operated inner illumination has been provided.
- Castor wheels are also provided.
- Temperature range 5°C to 50°C + 1°C is controlled by digital temp.
- Controller cum indicator standard cooling unit is installed for low temperature working, inner air circulation system also provided.
- A control panel with indicators equipment to work on 220V AC.
- Digital Temperature Indicator cum Controller with LED display OR Microprocessor based.
SKU: BCI64 - Double walled construction, inner made out of highly polished stainless steel sheet, outer made of mild steel sheet duly
Reviews
There are no reviews yet