No products in the cart.
Laboratory instruments
Herbarium Cabinet
- For keeping botanical specimens securely placed in herbarium sheets.
- Cabinet frame of 19 mm ply board finished with laminated sheet.
- Hinged MDF baton on collectively lock the drawers.
- Frame of MDF with plyboard bottom fitted with puller knobs and index card. Holder.
- Phosphorous bronze clip provided inside drawer for keeping herbarium sheets in position.
- Drawers finished in spirit polish.
- Drawers size :- 450mm x 370mm x 80mm.
Compare
You may also like…
- Laboratory instruments
Seed Drier
Seed drier is the equipment which is used to dry the seeds in the bad weather conditions and helps to retain high value of seed in the market.
Technical Data:
- Triple wall construction.
- Outer body made of thick mild steel sheet duly painted in powder coated / stoving or hammer tone paint inner working chamber made of highly polished stainless steel sheet.
- Temperature range +5° Ambient to 70°C.
- Controlled by microprocessor based digital temperature controller cum indicator with inbuilt timer.
- Constant air circulation in the chamber to circulate heat in the chamber and to maintain equal temperature on all sides.
- Easily replaceable tubular elements.
- Mobile movement through castor wheels and good locking system.
- With two wire mesh trays.
SKU: SD48 - Laboratory instruments
Slide Cabinet
- We are manufactures of slide cabinets that are safe and easy to handle, manufacture using optimum quality ply board sheet laminated with sunmica.
- Further, an anodized aluminum slide tray for holding 75 x 25mm slide has been arranged separately to as not to disturb other compartments while taking out or putting in slides.
- Our range is known for its sturdy construction and is available in various size and specifications.
SKU: SCS75 - Laboratory instruments
Hot Air Universal Oven – Deluxe Model
- Standard double wall construction.
- Outer made of mild steel duly enamel painted or powder coated paint, inner made out of stainless steel sheet. Heating elements provided at bottom & two sides.
- Temperature Range: +5°C Ambient to 250°C.
- Temperature Accuracy: +1°C’
- Forced Convection: Available with forced convection system (Standard Features).
- Temperature Controller : Microprocessor based Digital Temperature Indicator-cum-controller with in following.
SKU: HUD28
Related products
- Laboratory instruments
Seed Germinator
Cabinet Construction : Inner chamber made of highly grade rust tree stainless steel design and outer made of mild steel powder coated on stoving paint. Door opening provides full access to the chamber interior. A magnetic gasket provides a tight seal to door frame. A second internal glass door provides observation window with out disturbing the internal atmosphere. Shelving tiers of white epoxy coated aluminum.
Refrigeration : Cooling for seed germinations is provided by a self contained air-cooled condensing unit with hot gas bypass for continuous compressor operation.
Humidification: Humidification system is a centrifugal humidifier. Centrifugal atomizing humidifiers must be supplied with clean water.
Control System: Microprocessor based digital temperature controller with Graphic LCD display, capable of programming temperature, humidity and light intensity. PID controlled base system, relative humidity sensor is also provided.
SKU: SG10 - Laboratory instruments
Stability Chamber
- Standard Double wall construction inner/outer chamber made out of highly polished stainless steel sheet of 304 grade.
- Temperature range 10°C to 60°C + 0.5°C and humidity from 35% to 95% or less RH controlled by Microprocessor
based PID type digital controlled. - Digital LCD display.
- Microprocessor based PID temperature controller cum indicator.
- Microprocessor based PID humidity controller cum indicator.
- Low water cut off.
SKU: SC125 - Laboratory instruments
Dry Bath Incubator
- Digital, 24 holes for 12mm tubes, +5°C above ambient to 70°C.
- Temperature sensor PT-100.
- Maximum heating power 125W, Temperature Controller PID, Timer 1 min to 99 minutes, LCD Display for time & temperature, Anodized Aluminum block 220V AC, Available with Buzzer alarm & overheat protection.
SKU: DBI12 - Laboratory instruments
B.O.D. Incubator (Bio-chemical Oxygen Demand)
- Double walled construction, inner made out of highly polished stainless steel sheet, outer made of mild steel sheet duly
finished in stoving enamel paint or powder coating pain provided with magnetic gasket. - Inner door is made of transparent acrylic sheet or operated inner illumination has been provided.
- Castor wheels are also provided.
- Temperature range 5°C to 50°C + 1°C is controlled by digital temp.
- Controller cum indicator standard cooling unit is installed for low temperature working, inner air circulation system also provided.
- A control panel with indicators equipment to work on 220V AC.
- Digital Temperature Indicator cum Controller with LED display OR Microprocessor based.
SKU: BCI64 - Double walled construction, inner made out of highly polished stainless steel sheet, outer made of mild steel sheet duly
- Laboratory instruments
Mortuary Chamber
- Double wall construction inner stainless steel and outer mild steel duly painted with rust proof paint.
- Trays travel on rollers fitted with ball bearing, trays made of stainless sheet to carry bodies are provided with handles.
- Temperature Range 2C to 5°C controlled by digital temperature controller cum indicator to work on 220 Volts AC Supply.
SKU: MC3
Reviews
There are no reviews yet