chamber
Showing all 26 resultsSorted by latest
-
Laboratory instruments
De Humidifier
- Dehumidified water condensing type, based on refrigeration cycle to avoid use expensive chemicals required for desiccant type models.
- The unit is self-standing and is mounted on a sturdy angle iron filled with caster wheels.
- Desiccant dehumidifier removes the moisture from the atmosphere and fitted with hermetically sealed compressor heat exchange and water condensing coils are made of copper.
- Water collection tank is provided below the unit to collect condenser water.
- Humidity is controlled by automatic humidistat incorporated in the unit, up to 30% +3% rh, depending upon the ambient conditioners.
- To achieve very humidity, the room should have an independent window type air conditioner to match with the dehumidifier heat load in the room.
SKU: DHF2 -
-
Laboratory instruments
UV Inspection Cabinet
- UV light is short wave 254 nm & in long wave 365 nm.
- Contoured Viewing hood with safety UV barrier filter protect eyes.
- Soecial short UV filter for high detection ability and sensitivity.
- UV absorbing matt black finish gives sensitivity.
- All metal body powder coated for rugged dependability along with one flourocent tube.
SKU: UIC25 -
Laboratory instruments
Thin Layer Chromatograph Apparatus (TLC Kit)
- This unit is based on dosage german pattern having movable applicator with in built thickness arrangement between 0 to 2 mm have the following components.
- Spreader (applicator) made of electroplated brass.
- Perspex base size 114 x 23 cm to support glass plates size 20 x 20 cm and 2 plates of 20 x 5 c.
- Plate rack aluminum for ten 20 x 20 cm plates.
SKU: TLC20 -
-
Laboratory instruments
Aseptic Cabinet
- M.S. Structure with slopping front, acrylic front and side doors (fully transparent), 3โ germicidal ultra-violet tube and 2โ fluorescent tubes for white light, with necessary choke blast, starter and switches.
- Also mains lead; plug and two holes with rings and sleeves for insertion arms are provided. Size 95x 50×50 cm.
SKU: ASC3 -
Laboratory instruments
Cooks Pole Climbing Response Apparatus
- This is improved used friendly model with both light & sound stimuli can be selected by a switch.
- Shock stimulus is of 200 volt 2 M 50 HZ AC.
- Application of shock cab be either manual or automatic and also ready or delayed.
- Both duration of delay and application of shock are controlled by 11 position timer switch.
SKU: CPC20 -
-
Laboratory instruments
Material Storage Cabinet
- Dimensionally accurate range of Material Storage Cabinet (Vertical Flow) is offered in competitive rates our esteemed clients.
- This cabinet is designed for creation of a bacteria dust free air soace and are used for work with low-risk substances and materials, when protecting working material from environment is required or work with item required a sterile working zone.
- These can withstand temperature and pressure fluctuations.
SKU: MSC5 -
Laboratory instruments
Biological Safety Cabinet
- Offered here is an exhaustive range of Biological Safety Cabinets in class II/Type 2 that are designed for universities, research laboratories, pharmacies and pharmaceuticals companies to protect both users and procedures from contamination when working with biological fields.
- These are extensively used in protecting the operator from cross contamination of samples and primary containment of the bio hazardous materials being used.
- It operates with minimum airflow velocity of 100 fom (0.5 m/s) through face opening.
SKU: BSC2 -
Laboratory instruments
Flash Point Apparatus
- It consist of brass test cup. Cup over and spring loaded rotating shutter, pilot jet stirrer with flexible shaft.
- Assembly on air covered with dome shaped metal top.
- Cup is fitted with insulated handle and locking arrangement near the cup Lange.
- Round electric heater is provided with temp regulator. To work on 220V AC.
SKU: FPA22 -
Laboratory instruments
Tissue Homogeniser
- Heavy cast iron with mild steel chrome plated upright rod with adjustable clamp to hold โ HP motor stainless steel
stirring rod mounted with taflon grinder. - Complete with adjustable clamp to hold tissue homogenizing of boroslilicate glass.
- Variable speed regulator. To work on 220V AC.
SKU: TH20 - Heavy cast iron with mild steel chrome plated upright rod with adjustable clamp to hold โ HP motor stainless steel
-
Laboratory instruments
Seed Drier
Seed drier is the equipment which is used to dry the seeds in the bad weather conditions and helps to retain high value of seed in the market.
Technical Data:
- Triple wall construction.
- Outer body made of thick mild steel sheet duly painted in powder coated / stoving or hammer tone paint inner working chamber made of highly polished stainless steel sheet.
- Temperature range +5ยฐ Ambient to 70ยฐC.
- Controlled by microprocessor based digital temperature controller cum indicator with inbuilt timer.
- Constant air circulation in the chamber to circulate heat in the chamber and to maintain equal temperature on all sides.
- Easily replaceable tubular elements.
- Mobile movement through castor wheels and good locking system.
- With two wire mesh trays.
SKU: SD48 -
Laboratory instruments
Seed Germinator – Double Chamber
Cabinet Construction :- Inner chamber made of highly grade rust tree stainless steel design and outer made of mild steel powder coated on stoving paint. Door opening provides full access to the chamber interior. A magnetic gasket provides a tight seal to door frame. A second internal glass door provides observation window with out disturbing the internal atmosphere. Shelving tiers of white epoxy coated aluminum.
Refrigeration :- Cooling for seed germinations is provided by a self-contained air-cooled condensing unit with hot gas bypass for continuous compressor operation.
Humidification:- Humidification system is a centrifugal humidifier. Centrifugal atomizing humidifiers must be supplied with clean water.
Control System :- Microprocessor based digital temperature controller with Graphic LCD display, capable of programming temperature, humidity and light intensity. PID controlled base system, relative humidity sensor is also provided.
SKU: SDDC20 -
Laboratory instruments
Seed Germinator
Cabinet Construction : Inner chamber made of highly grade rust tree stainless steel design and outer made of mild steel powder coated on stoving paint. Door opening provides full access to the chamber interior. A magnetic gasket provides a tight seal to door frame. A second internal glass door provides observation window with out disturbing the internal atmosphere. Shelving tiers of white epoxy coated aluminum.
Refrigeration : Cooling for seed germinations is provided by a self contained air-cooled condensing unit with hot gas bypass for continuous compressor operation.
Humidification: Humidification system is a centrifugal humidifier. Centrifugal atomizing humidifiers must be supplied with clean water.
Control System: Microprocessor based digital temperature controller with Graphic LCD display, capable of programming temperature, humidity and light intensity. PID controlled base system, relative humidity sensor is also provided.
SKU: SG10 -
Laboratory instruments
Deep Freezer, -86ยฐC
- Double wall construction with PUF insulation between inner and outer wall.
- Refrigeration system through hermitically sealed compressor inner high grade stainless steel outer made of mild steel sheet duly painted in powder coated paint.
- Temperature range upto -40ยฐC controlled by microprocessor based digital temperature controlled cum indicator.
SKU: DF86 -
Laboratory instruments
Deep Freezer, -40ยฐC
- Double wall construction with PUF insulation between inner and outer wall.
- Refrigeration system through hermitically sealed compressor inner high grade stainless steel outer made of mild steel sheet duly painted in powder coated paint.
- Temperature range upto -40ยฐC controlled by microprocessor based digital temperature controlled cum indicator.
SKU: DF40 -
Laboratory instruments
Deep Freezer, -20ยฐC
- Double wall construction with PUF insulation between inner and outer wall.
- Refrigeration system through hermitically sealed compressor inner high grade stainless steel outer made of mild steel sheet duly painted in powder coated paint.
- Temperature range upto -20ยฐC controlled by microprocessor based digital temperature controlled cum indicator.
SKU: DF20 -
Laboratory instruments
Stability Chamber
- Standard Double wall construction inner/outer chamber made out of highly polished stainless steel sheet of 304 grade.
- Temperature range 10ยฐC to 60ยฐC + 0.5ยฐC and humidity from 35% to 95% or less RH controlled by Microprocessor
based PID type digital controlled. - Digital LCD display.
- Microprocessor based PID temperature controller cum indicator.
- Microprocessor based PID humidity controller cum indicator.
- Low water cut off.
SKU: SC125 -
Laboratory instruments
Environmental Chamber (Humidity Cabinet Delux)
- Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity.
- Inner chamber and trays are made of stainless steel (S.S.-304 Grade).
- Outer wall of mild steel sheet duly powder coated.
- Mounted on caster wheels for easy portability.
- High grade glass wool insulation between outer and inner chamber for minimal thermal loss.
- Front double walled door is provided with lock and key arrangement.
- A self-cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber.
SKU: HCD112 -
Laboratory instruments
Humidity Chamber
- Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild
steel duly painted in powder coated paint or stoving paint. - Temperature range 5ยฐC to 55ยฐC + 2ยฐC and humidity from 55% to 95% +3% Rh.
- Stainless steel water reservoirs heated by immersion heaters provide humidity complete with all accessories.
SKU: HC95 - Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild
-
Laboratory instruments
Mortuary Chamber
- Double wall construction inner stainless steel and outer mild steel duly painted with rust proof paint.
- Trays travel on rollers fitted with ball bearing, trays made of stainless sheet to carry bodies are provided with handles.
- Temperature Range 2C to 5ยฐC controlled by digital temperature controller cum indicator to work on 220 Volts AC Supply.
SKU: MC3
