Shop
Showing 97–144 of 431 resultsSorted by latest
-
Laboratory instruments
Pass Box Dynamic
- Dynamic Pass Box made of stainless steel 304 grade, double walled, fitted with magnetic interlocking system on two doors.
- Complete with motor blower and HEPA filterโ magnehelic gauge for pressure, flourescent light, UV light for germinal free area.
SKU: PBD18 -
Laboratory instruments
Biological Safety Cabinet
- Offered here is an exhaustive range of Biological Safety Cabinets in class II/Type 2 that are designed for universities, research laboratories, pharmacies and pharmaceuticals companies to protect both users and procedures from contamination when working with biological fields.
- These are extensively used in protecting the operator from cross contamination of samples and primary containment of the bio hazardous materials being used.
- It operates with minimum airflow velocity of 100 fom (0.5 m/s) through face opening.
SKU: BSC2 -
Laboratory instruments
Fume Hood
- Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personal and equipment in the laboratories.
- A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in high up atmosphere through ducting.
- Fabricated out of thick ply board clad from outside with laminated sheet and inside finished in non- corrosive epoxy paint.
- An up-down sliding sash with glass sheet is provided.
- Flurescent lighting is also provided.
- A gas tap, water tap and wash basin is also provided.
SKU: FHR3 -
Laboratory instruments
Laminar Air Flow Vertical
- Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface. - Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAV3 - Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
-
Laboratory instruments
Laminar Air Flow Cabinet Horizontal
- Laminar flow principle involves double filtration of air through pre-filters (upto 5 microns) and hepa filters (down to 0.3 microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface.
- Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAC3 -
Laboratory instruments
Infrared Moisture Balance
- A basic method for determination of moisture content, measure moisture percentage by weight and drying simultaneously.
- Infra Red radiation are radiation are reflector by a bulb and its Temperature is controlled by a regulator.
- The balance scale is divided in terms of moisture content on net weight basis.
SKU: IRM20 -
Laboratory instruments
Digital Bomb Calorimeter (without Oxygen Cylinder)
- DIGITAL BOMB CALORIMETER (with safety device) Bomb calorimeter outfit provides a simple and inexpensive method
for determination of heat of combustion of organic matter and the calorific value and sulphur content of solid and liquid
duel. - The outfit supplied is complete for analysis as per the method recommended by British standard institution BS 1016.
- All parts of the outfit have been finished of petroleum and british standard institute.
SKU: DBC2 - DIGITAL BOMB CALORIMETER (with safety device) Bomb calorimeter outfit provides a simple and inexpensive method
-
Laboratory instruments
COD Digestion Unit
- Uniform heating without Water Circulation.
- Solid block Heated type.
- Auto time control unit & digital temperature controller for better results.
- Compact construction and ergonomic Design.
- Standard APHA Method.
- Provided with stand and standard accessories.
SKU: COD15 -
Laboratory instruments
Precision Melting Point Apparatus
- This is a compact instrument designed for accurate determination of melting points of solid samples.
- The unit consists of a built in magnetic stirrer, an elect roller for adjusting the rate of heating of silicon oil bath.
- An on/off switch, a pilot lamp, magnifier, a glare free background illuminated.
- A high/low range selector witch and a digital temperature indicator with PT 100 sensor.
SKU: PMPA10 -
-
Laboratory instruments
Sieve Shaker – Gyratory Type
- Driven by a 0.25 H.P. Motor, volt A.C.
- Through a reduction gear and is suitable to carry Up to 7 sieves of 6โ or 8โ dia.
- When clamped the sieve table does not totate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction.
- In addition to the gyratory motion of the shaker there is Upward and downward movement at a frequency of 270r.p.m.
SKU: SSG27 -
Laboratory instruments
Rotary Vaccum Evaporator – Buchi Apparatus
- It is used vaccum distillation at high and low temp having non-sparking motor reduces risk of fire at variable speed for variety of use (PORPM to 200RPM).
- It permits continuous feed of solvent into evaporating pear shape flask also distillation Under control atmosphere.
- All glass parts are easily replaceable.
- It is supplied with 1 Lt. Evaporator and receiving flask.
SKU: RVE2 -
Laboratory instruments
Water Double Distillation, All Quartz – Vertical Model
- All Quartz Double Distillation consists of demountable Upper And Lower Boiler.
- ย The Lower Boiler has a built in heater enclosed in a Quartz Boiler with a Cup on top.
- The Upper Boiler has a built in Quartz coil and Condensing unit which is mounted on the boiler with the help of Ball and Socket joint.
- Double walled condenser ensures separate condensation of vapors coming from the two boilers using a single cooling circuit.
- The unit in mounted on a specially designed powder coated stand and is also provided with Automatic Safety Control Unit.
- This new Dual – Safety cut off has been designed for better and accurate control of the distillation unit.
- It has been incorporated with advanced Microprocessor based electronic circuitry.
- The alpha numeric LCD which has been used which shows all messages that corresponds to the running of the machine.
SKU: WDD5 -
Laboratory instruments
Water Distillation – QUARTZ (Horizontal Model)
- Replaceable Silica Heater: The Horizontal Quartz Jacket is fitted with removable silica heater and screw threaded connectors for ease of cleaning when scaling is formed.
- Distillate temperature is around 25 to 45ยฐC which is ensured by an efficient condenser.
- The stand is powder coated for rust free operation and lustrous appearance.
- The unit automatically switches off if water level in the boiler falls below heater.
- Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy.
- Electrical Power: 220/240 V, 50/60Hz, Single Phase Supply.
- Boiler is provided with Teflon Screw Cork for easy draining and cleaning of boiling chamber.
SKU: WDQ2 -
Laboratory instruments
Water Still With Metal Heater – Horizontal Type
- It comprises of Horizontal Borosilicate Glass Boiler fitted with a 3 KW chromium plated immersion heater with cut-off, highly efficient coil condenser ensures a reliable output of single stage distillate.
- It is designed for easy usage, safe to operate and low cost.
SKU: WSH3 -
-
Laboratory instruments
Kjeldahl Distillation and Digestion Units (Without Glass Parts)
- One single mild steel tabular stand is provided with two heating shelves, one above the other.
- A fume duct holder and a heating box supplied for digestion unit.
- The heating unit have individual ON/OFF switches.
- In the upper portion another heating unit with a condenser rack is provided to work 220V AC.
SKU: KDD3 -
-
Laboratory instruments
Pipette Washer
- Siphon principle is used to fabricated this equipment.
- Large size pipettes washable automatically in clinical, serological labs etc.
- Washing cylinder 63×15 cm (dia made of stainless steel sheet is mounted on base of 26 cm dia.) Pipette holder is removable.
- This accommodates pipettes Upto 375 cm lengths.
SKU: PIW26 -
Laboratory instruments
Flash Point Apparatus
- It consist of brass test cup. Cup over and spring loaded rotating shutter, pilot jet stirrer with flexible shaft.
- Assembly on air covered with dome shaped metal top.
- Cup is fitted with insulated handle and locking arrangement near the cup Lange.
- Round electric heater is provided with temp regulator. To work on 220V AC.
SKU: FPA22 -
Laboratory instruments
Heating Mantle – Single Size
- Body fabricated out of single piece aluminum and logged with special mineral wool.
- Provided with ON/OFF switch, pilot lamp, control knob etc.
- Provided with joint less hand knitte glass yarn capable of with standing high temperature upto 400ยฐ C. Work On 220V AC.
SKU: HMS50 -
-
Laboratory instruments
Laboratory Hot Plate – Rectangular
- Combining outstanding quality and value, our organization is offering excellent quality Rectangular Laboratory Hot Plate.
- Our experienced professionals manufacture these Rectangular laboratory hot plates in accordance with the international quality standards.
SKU: HPR12 -
Laboratory instruments
Laboratory Hot Plate – Round Double
- Combining outstanding quality and value, our organization is offering excellent quality Round Double Laboratory Hot Plate.
- Our experienced professionals manufacture these round double laboratory hot plates in accordance with the international quality standards.
SKU: LHPB20 -
Laboratory instruments
Laboratory Hot Plate – Round
- Combining outstanding quality and value, our organization is offering excellent quality Round Laboratory Hot Plate.
- Our experienced professionals manufacture these round laboratory hot plates in accordance with the international quality standards.
SKU: LHB8 -
Laboratory instruments
Tissue Homogeniser
- Heavy cast iron with mild steel chrome plated upright rod with adjustable clamp to hold โ HP motor stainless steel
stirring rod mounted with taflon grinder. - Complete with adjustable clamp to hold tissue homogenizing of boroslilicate glass.
- Variable speed regulator. To work on 220V AC.
SKU: TH20 - Heavy cast iron with mild steel chrome plated upright rod with adjustable clamp to hold โ HP motor stainless steel
-
Laboratory instruments
Magnetic Stirrers
- Stirring is accomplished by a teflon rotor placed in the liquid to be stirred through a continuously variable speed regulator.
- Body is made of mild steel finished in powder coated with a stainless steel top which serves as a hot plate.
- In models with heating arrangement temperature is controlled by thermostat.
SKU: MS01 -
-
-
Laboratory instruments
Water Bath Incubator Shaker – Metabolic Shaking Incubator
- Standard Double wall construction, inner made of highly polished stainless steel sheet exterior made of mild steel duly
finished in powder coating paint. - Temp, range ambient to 100ยฐC thermostatically controlled or digital temperature control accuracy ยฑ 5ยฐC.
- Oscillating tray on ball rollers. Shaking speed 40-140 rom. To work on 220V AC.
SKU: MSI12 - Standard Double wall construction, inner made of highly polished stainless steel sheet exterior made of mild steel duly
-
-
Laboratory instruments
Paraffin Embedding Bath
- Double wall construction, inner made out of stainless steel and outer made of mild steel sheet duly finished in powder
coating paint. - Temp, range ambient to 80ยฐC ยฑ1ยฐC and is controlled by a thermostat with cups and sleeves for glass tube. To work on 220V AC.
SKU: PEB4 - Double wall construction, inner made out of stainless steel and outer made of mild steel sheet duly finished in powder
-
Laboratory instruments
Thermostatic Water Bath – Rectangular Double Wall
- Double wall construction, inner made out of stainless steel sheet and outer made of mild controlled by a thermostat.
- Concentric rings have been provided on holes to accommodated various sizes of container/vessels.
- To work on 220 VAC.
SKU: RDW8 -
Laboratory instruments
High Precision Water Bath
- Double wall construction, inner made out of stainless steel sheet and outer made of mild steel sheet duly finished in
stoving enamel paint or powder coated. - Glass window provided on opposite sides, A high speed regulated stirrer provided.
- Temp control is attained by a mercury contact thermometer or digital temperature controller with a Temp.
- Range ambient to 100ยฐC ยฑ1ยฐC. To work on 220 VAC.
SKU: HPWB24 - Double wall construction, inner made out of stainless steel sheet and outer made of mild steel sheet duly finished in
-
-
