Laboratory instruments
Showing 49–96 of 154 resultsSorted by latest
-
Laboratory instruments
Thin Layer Chromatograph Apparatus (TLC Kit)
- This unit is based on dosage german pattern having movable applicator with in built thickness arrangement between 0 to 2 mm have the following components.
- Spreader (applicator) made of electroplated brass.
- Perspex base size 114 x 23 cm to support glass plates size 20 x 20 cm and 2 plates of 20 x 5 c.
- Plate rack aluminum for ten 20 x 20 cm plates.
SKU: TLC20 -
-
-
Laboratory instruments
Aseptic Cabinet
- M.S. Structure with slopping front, acrylic front and side doors (fully transparent), 3โ germicidal ultra-violet tube and 2โ fluorescent tubes for white light, with necessary choke blast, starter and switches.
- Also mains lead; plug and two holes with rings and sleeves for insertion arms are provided. Size 95x 50×50 cm.
SKU: ASC3 -
-
Laboratory instruments
Rota Rod
- For determining neuro-pixicity, muscle tone, balance and motor co-ordination in rats and mice.
- Consists of two compartments of 75 mm width each with a rotating rod o 25 mm diameter having speeds of 5, 10, 15, 20 and 25 r.p.m time counter in each compartments.
SKU: RRD75 -
Laboratory instruments
Spirometer
- 6 Liter capacity for vital capacity, or use as a gasometer with teflon wire (for smooth functioning) compensated counter balance to the float balanced through cut is movement pulley calibrated to denote volume inlet and outlet tubes, side cock for gases, cock for draining off water strong construction.
- Complete with sorrugated tube mouth piece & recording lever.
SKU: SPR6 -
Laboratory instruments
Cooks Pole Climbing Response Apparatus
- This is improved used friendly model with both light & sound stimuli can be selected by a switch.
- Shock stimulus is of 200 volt 2 M 50 HZ AC.
- Application of shock cab be either manual or automatic and also ready or delayed.
- Both duration of delay and application of shock are controlled by 11 position timer switch.
SKU: CPC20 -
Laboratory instruments
Tablet Hardness Tester – Pfizer Type
- A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip.
- The instrument offers accurate and reproducible results much faster other conventional hardness testers.
SKU: THT2 -
Laboratory instruments
Tablet Hardness Tester – Monsanto Type
- A fairly instruments for taking quick reading for the hardness of tablets.
- It is made of brass turned parts, heavily chrome plated, the scale is 0 to 20 kg and the index mark and division is in 1 kg reading.
- Scale adjustable for zero setting as per size of the tablets.
SKU: THT20 -
Laboratory instruments
Friability Apparatus
- This apparatus is designed to determine the abrasion rate and impact hardness of tablet.
- One transparent acrylic drum is rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant powder coated paint.
SKU: FRA25 -
Laboratory instruments
Analgererid Meter – Tail Flick
- The instrument is used to study the analgesic effects in case of mice.
- Heat is used as source of pain.
- The tail of mice is held at different temperature & tail licking response is studied.
- The current through the element generation head can be controller from maximum to value by thermostat.
SKU: AMT3 -
Laboratory instruments
Analgesiometer Eddy Hotplate
- Offering Analgesia meter Eddyโs Hot Plate, with square box consisting of 30×30 cms, heating surface with perspex enclosure and solid state digital temperature controller.
- Indicating galvanomefter to set surface temp, Between 30ยฐ to 80ยฐC.
SKU: AEH30 -
Laboratory instruments
Tablet Disintegration Apparatus
Tablet-Disintegration with double / single Disc with 12 removable glass vessels have a S.S. Wire mesh bottom, which dip in water in a beaker of 1000 ml kept on the hot plate, temperature of which is maintained 37ยฐC with an accuracy of 1ยฐC, 250 watts.
SKU: TDA12 -
Laboratory instruments
Electro Convulse Meter
- This instrument is used for applying Maximal Electro shock (MES) through the corneal electro rods provided with the instruments.
- It is used to study the anticonvulsant activity of phenytoin against Maximal electro shock induced convulsions in rats.
- This instrument has been designed with the modern state of art technology incorporating MSl electronic circuitry.
SKU: ECM2 -
Laboratory instruments
Bulk Density Apparatus
- Specially designed to study, the packing down of power beds of different pharmaceuticals and chemicals in the process of tablet manufacturing, capsule filing & cosmetics.
- Installed with an automatic device for preset of strokes.
- Driven noiseless and sturdy motor.
- Elegantly designed for smooth operation electrically operated on 230V AV, 50H.
SKU: BDA23 -
Laboratory instruments
Ball Mill Motor Driven SS Jar Blade
- Capacity 1 kg, a compact unit build on a metal platform, with geared with motor which revolves a drum and contains a stainless steel vessel and the drum rotates on brackets.
- Complete with set of balls, main lead and plug with 150 RPM.
- Works on 220 Volts AC.
SKU: BMD2 -
Laboratory instruments
Ampoule Washing Device
- Jet needle type, consists of 6 stainless steel needle, jet fixed on a stainless steel pipe of 12.5 mm.
- Dia, With side tap and serrations for dixing rubber tube tap water.
- Spring loaded ampoule holding arrangement for various sized of ampoules and a stainless steel bottom trad on the stand.
SKU: AWM6 -
Laboratory instruments
Ampoule Filling and Sealing Machine
Motor operated syringe type device is provided with automatic intake and out flow of fluid and all contact parts of borosil glass, giving ten Ampoules per minute capacity of fiadjustment form 1 ml to 50 ml fitted gas burner but without gas cylinder.
SKU: AFS50 -
Laboratory instruments
Activity Cage – Acto Photometer
- This instrument is designed with the modern state of art technology incorporating LSI Electronic digital circuitry.
- The chamber for the animal is made out of clear perspex sheet fitted with grill of nickel plated brass rods placed 3/16โ apart.
- An build variable shock arrangement of strength 100v, 50ma is provided in the instrument.
- Also a four digit counter is provided which counts the movement of the animal, inside the persoex chamber.
- The counter is provided with a reset switch.
SKU: ACA50 -
Laboratory instruments
Herbarium Cabinet
- For keeping botanical specimens securely placed in herbarium sheets.
- Cabinet frame of 19 mm ply board finished with laminated sheet.
- Hinged MDF baton on collectively lock the drawers.
- Frame of MDF with plyboard bottom fitted with puller knobs and index card. Holder.
- Phosphorous bronze clip provided inside drawer for keeping herbarium sheets in position.
- Drawers finished in spirit polish.
- Drawers size :- 450mm x 370mm x 80mm.
SKU: HCA12 -
-
Laboratory instruments
Tissue Culture Rack
- We are of the leading provides of Tissue Culture Racks.
- Racks are knows for increasing the incubator capacity of the products.
- Furthermore, the uniquely designed range prevents the flipping over of flasks above one another.
- Easy handing is ensured by strong grips on both sided of the rack, which also in safely transferring the flasks to the incubator.
SKU: TCR16 -
Laboratory instruments
Material Storage Cabinet
- Dimensionally accurate range of Material Storage Cabinet (Vertical Flow) is offered in competitive rates our esteemed clients.
- This cabinet is designed for creation of a bacteria dust free air soace and are used for work with low-risk substances and materials, when protecting working material from environment is required or work with item required a sterile working zone.
- These can withstand temperature and pressure fluctuations.
SKU: MSC5 -
Laboratory instruments
Slide Cabinet
- We are manufactures of slide cabinets that are safe and easy to handle, manufacture using optimum quality ply board sheet laminated with sunmica.
- Further, an anodized aluminum slide tray for holding 75 x 25mm slide has been arranged separately to as not to disturb other compartments while taking out or putting in slides.
- Our range is known for its sturdy construction and is available in various size and specifications.
SKU: SCS75 -
Laboratory instruments
Industrial Air Curtain
- Offered by us are superior qualities industrial air curtains are used to create a curtain of air between air-conditioned and clean room to adjoining room.
- Widely used in various industries like, hospitals, hotels, and showrooms etc, these quality-tested Air Curtains are offered in varied specifications and that too at very affordable prices.
- This high end machinery ably creates an invisible barrier of high velocity air which provides complete protection against insects, dust, dirt and fumes.
SKU: IAC01 -
Laboratory instruments
Dispensing and Sampling Booth
- We are offring here a huge selection of Dispensing and sampling Booth that are ideal for weighing and dispensing of critical pharmaceutical and other powders.
- These booths provided a down flow of HEPA filtered clean air creating environment where powder is being dispensed as well as protect the worker, who is working inside form inhaling the powder fumes as the air bound powder gets trapped in suction filter at the bottom.
SKU: DSB3 -
Laboratory instruments
Pass Box Dynamic
- Dynamic Pass Box made of stainless steel 304 grade, double walled, fitted with magnetic interlocking system on two doors.
- Complete with motor blower and HEPA filterโ magnehelic gauge for pressure, flourescent light, UV light for germinal free area.
SKU: PBD18 -
Laboratory instruments
Biological Safety Cabinet
- Offered here is an exhaustive range of Biological Safety Cabinets in class II/Type 2 that are designed for universities, research laboratories, pharmacies and pharmaceuticals companies to protect both users and procedures from contamination when working with biological fields.
- These are extensively used in protecting the operator from cross contamination of samples and primary containment of the bio hazardous materials being used.
- It operates with minimum airflow velocity of 100 fom (0.5 m/s) through face opening.
SKU: BSC2 -
Laboratory instruments
Fume Hood
- Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personal and equipment in the laboratories.
- A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in high up atmosphere through ducting.
- Fabricated out of thick ply board clad from outside with laminated sheet and inside finished in non- corrosive epoxy paint.
- An up-down sliding sash with glass sheet is provided.
- Flurescent lighting is also provided.
- A gas tap, water tap and wash basin is also provided.
SKU: FHR3 -
Laboratory instruments
Laminar Air Flow Vertical
- Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface. - Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAV3 - Laminar flow principle involves double filtration of air through pre-filters (Upto 5 microns) and hepa filters (down to 0.3
-
Laboratory instruments
Laminar Air Flow Cabinet Horizontal
- Laminar flow principle involves double filtration of air through pre-filters (upto 5 microns) and hepa filters (down to 0.3 microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface.
- Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet.
- Front door is also made of acrylic sheet.
- Superior motor is used for blower.
- Unit is supplied with manometer, UV tube, fluorescent lighting tubes.
SKU: LAC3 -
Laboratory instruments
Infrared Moisture Balance
- A basic method for determination of moisture content, measure moisture percentage by weight and drying simultaneously.
- Infra Red radiation are radiation are reflector by a bulb and its Temperature is controlled by a regulator.
- The balance scale is divided in terms of moisture content on net weight basis.
SKU: IRM20 -
Laboratory instruments
Digital Bomb Calorimeter (without Oxygen Cylinder)
- DIGITAL BOMB CALORIMETER (with safety device) Bomb calorimeter outfit provides a simple and inexpensive method
for determination of heat of combustion of organic matter and the calorific value and sulphur content of solid and liquid
duel. - The outfit supplied is complete for analysis as per the method recommended by British standard institution BS 1016.
- All parts of the outfit have been finished of petroleum and british standard institute.
SKU: DBC2 - DIGITAL BOMB CALORIMETER (with safety device) Bomb calorimeter outfit provides a simple and inexpensive method
-
Laboratory instruments
COD Digestion Unit
- Uniform heating without Water Circulation.
- Solid block Heated type.
- Auto time control unit & digital temperature controller for better results.
- Compact construction and ergonomic Design.
- Standard APHA Method.
- Provided with stand and standard accessories.
SKU: COD15 -
Laboratory instruments
Precision Melting Point Apparatus
- This is a compact instrument designed for accurate determination of melting points of solid samples.
- The unit consists of a built in magnetic stirrer, an elect roller for adjusting the rate of heating of silicon oil bath.
- An on/off switch, a pilot lamp, magnifier, a glare free background illuminated.
- A high/low range selector witch and a digital temperature indicator with PT 100 sensor.
SKU: PMPA10 -
-
Laboratory instruments
Sieve Shaker – Gyratory Type
- Driven by a 0.25 H.P. Motor, volt A.C.
- Through a reduction gear and is suitable to carry Up to 7 sieves of 6โ or 8โ dia.
- When clamped the sieve table does not totate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction.
- In addition to the gyratory motion of the shaker there is Upward and downward movement at a frequency of 270r.p.m.
SKU: SSG27 -
Laboratory instruments
Rotary Vaccum Evaporator – Buchi Apparatus
- It is used vaccum distillation at high and low temp having non-sparking motor reduces risk of fire at variable speed for variety of use (PORPM to 200RPM).
- It permits continuous feed of solvent into evaporating pear shape flask also distillation Under control atmosphere.
- All glass parts are easily replaceable.
- It is supplied with 1 Lt. Evaporator and receiving flask.
SKU: RVE2 -
Laboratory instruments
Water Double Distillation, All Quartz – Vertical Model
- All Quartz Double Distillation consists of demountable Upper And Lower Boiler.
- ย The Lower Boiler has a built in heater enclosed in a Quartz Boiler with a Cup on top.
- The Upper Boiler has a built in Quartz coil and Condensing unit which is mounted on the boiler with the help of Ball and Socket joint.
- Double walled condenser ensures separate condensation of vapors coming from the two boilers using a single cooling circuit.
- The unit in mounted on a specially designed powder coated stand and is also provided with Automatic Safety Control Unit.
- This new Dual – Safety cut off has been designed for better and accurate control of the distillation unit.
- It has been incorporated with advanced Microprocessor based electronic circuitry.
- The alpha numeric LCD which has been used which shows all messages that corresponds to the running of the machine.
SKU: WDD5 -
Laboratory instruments
Water Distillation – QUARTZ (Horizontal Model)
- Replaceable Silica Heater: The Horizontal Quartz Jacket is fitted with removable silica heater and screw threaded connectors for ease of cleaning when scaling is formed.
- Distillate temperature is around 25 to 45ยฐC which is ensured by an efficient condenser.
- The stand is powder coated for rust free operation and lustrous appearance.
- The unit automatically switches off if water level in the boiler falls below heater.
- Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy.
- Electrical Power: 220/240 V, 50/60Hz, Single Phase Supply.
- Boiler is provided with Teflon Screw Cork for easy draining and cleaning of boiling chamber.
SKU: WDQ2
